Remote management is used to control the target device from outside wan network.The user can access the webgui admin page remotely and can take the configure the cable modem box. This is basically achieved through HTTP and HTTPS protocols.
TR-181 Data Model Parameter of Remote Management
Module | Data Model Params |
CcspPandM(TR181-USGv2.XML) | - Device.UserInterface.X_CISCO_COM_RemoteAccess.HttpEnable
- Device.UserInterface.X_CISCO_COM_RemoteAccess.HttpsEnable
- Device.UserInterface.X_CISCO_COM_RemoteAccess.Enable
- Device.UserInterface.X_CISCO_COM_RemoteAccess.FromAnyIP
- Device.UserInterface.X_CISCO_COM_RemoteAccess.StartIp
- Device.UserInterface.X_CISCO_COM_RemoteAccess.EndIp
- Device.X_CISCO_COM_DeviceControl.HTTPPort
- Device.X_CISCO_COM_DeviceControl.HTTPSPort
|
Set Parameter Work Flow
Using the Dmcli commands the user shall test the feature.
Sequence Diagram