This is the summary page that describes the CMF iteration rdkb-20180426. Below are links to the relevant documents for the release.

Note: The latest rdkb iteration addresses licensing issues so users are advised to move to the latest iteration.

Note: For the Gerrit links, you need to log in before you will be able to see the contents.

A detailed changelog since the last iteration RDK-B_20180325 can be found here.


Baseline

Baselinenightly/2018042620180426 baseline.
Post-baseline updates  
TDKM57https://wiki.rdkcentral.com/display/TDK/TDK-B+Release+M57
Manifestrdkb-20180426 


Highlights since RDK-B_20180325

Getting the code

Note: The manifests repository is only available to RDK licensees.

$ mkdir rdkb
$ cd rdkb
$ repo init -u https://code.rdkcentral.com/r/manifests -m rdkb.xml -b rdkb-20180426
$ repo sync -j4 --no-clone-bundle


Building for the emulator

$ source meta-cmf-bsp-emulator/setup-environment (select qemux86broadband)
$ bitbake rdk-generic-broadband-image

The image path will be: build-qemux86broadband/tmp/deploy/images/qemux86broadband/rdk-generic-broadband-image-qemux86broadband.vmdk

To build TDK, follow the steps as for a normal build, above, but use the following bitbake command:

$ bitbake rdk-generic-broadband-tdk-image

The image path will be: build-qemux86broadband/tmp/deploy/images/qemux86broadband/rdk-generic-broadband-tdk-image-qemux86broadband.vmdk

TDK documentation is available here: release M57


Running the emulator

  1. Start VirtualBox.
  2. Click New -> Enter name -> Select type Linux -> Select version Other Linux (32 bit) -> Click Next
  3. Select Memory size - 512MB -> Click Next
  4. Select option Use an existing virtual hard drive -> Select the built image above -> Click Create
  5. Once the VM has been created, select the new image and click Settings -> Network -> Select Attached to: 'Bridged Adapter' -> Click Ok
  6. Click Start. This will bring up the emulator with the initial splash screen


Building for RaspberryPi

$ mkdir <workspace dir>
$ cd <workspace dir>
$ repo init -u https://code.rdkcentral.com/r/manifests -m rdkb.xml -b rdkb-20180426-rpi
$ repo sync -j4 --no-clone-bundle
$ source meta-cmf-raspberrypi/setup-environment

Select option raspberrypi-rdk-broadband.conf

$ bitbake rdk-generic-broadband-image

Note. The kernel Image and root filesystem will be created under the ./tmp/deploy/images/raspberrypi-rdk-broadband folder


Running on the RaspberryPi

Please see RDK Broadband (RaspberryPi)


Documentation for RDK-B on RaspberryPi

RDK Broadband (RaspberryPi)


RaspberryPi Sanity Testing

Sanity tests include:


Known Issues

Known issues are detailed here.