Build procedure to generate R-Pi image with EthAgent component
The build procedures are as follows:
- repo init -u https://code.rdkcentral.com/r/manifests -b rdk-next -m rdkb-extsrc.xml
- repo sync -j4 --no-clone-bundle
- source meta-cmf-raspberrypi/setup-environment (Select option raspberrypi-rdk-broadband.conf)
- bitbake rdk-generic-broadband-image
Flashing the image
Command to flash the image
Generated image has to be flashed to an SD card using this command in local PC:
$ sudo dd if =<path to ImageName.rootfs.rpi-sdimg> of=<path to SD card space> bs=4M
|
Ex:
$ sudo dd if =rdkb-generic-broadband-image_default_20181026100202.rootfs.rpi-sdimg of= /dev/sdd bs=4M
|
The SD card is inserted to the Raspberry Pi board and booted to check for containers created.
The Raspberry Pi board is connected to the PC via a USB to serial converter and the logs can be checked in console or can be connected via HDMI cable to a TV and logs will be shown in the terminal
Y
Z