This is the summary page that describes the CMF RDK-B release 2.1-20161024. 

Below are links to the relevant documents for the release.

For the Gerrit links, you need to log in before you will be able to see the contents.

 

The latest RDK-B release addresses licensing issues so users are advised to move to the latest release.

Baseline

 

BaselineCMF-201610242016-10-24 baseline.
Post-baseline updates  
TDKM40

https://rdkwiki.com/rdk/display/TDK/TDK-B+Release+01

Manifestrdkb-2.1-20161024 

Highlights since 2.1-20161010

  • New components: None.
  • Components updated:
    • CcspCMAgent, CcspCommonLibrary, CcspCr, CcspDmCli, CcspHomeSecurity, CcspLMLite, CcspMisc, CcspPandM, CcspPsm, CcspSnmpPa, CcspTr069Pa, CcspWecbController, CcspWifiAgent, GwProvApp, TestAndDiagnostic, Utopia, hal, hotspot, webui, rdkbemu_xb3.
  • Patches updated: None.
  • Community contributions: None.

Getting the code

$ mkdir rdkb
$ cd rdkb
$ repo init -u https://code.rdkcentral.com/r/manifests -m rdkb.xml -b rdkb-2.1-20161024
$ repo sync -j4 --no-clone-bundle
  • The -m rdkb.xml in the build sequence above is important. If this is not specified, you will get an RDK-V tree by default.
  • The -b rdkb-2.1-20161024 in the build sequence above specifies the branch to use. If you omit the -b rdkb-2.1-20161024 entirely, you will get the master (HEAD) of each component.
  • At any time, the community can build latest master by dropping the -b rdkb-2.1-20161024 option in the repo init command.
  • We have verified that this iteration boots to a login prompt and that you can log in, and that you can connect with a web browser to the web admin page, but that is the extent of the testing at this time.

Building the code

$ source meta-cmf-rdkb-bsp-emulator/setup-environment (select qemux86broadband)
$ bitbake rdk-generic-broadband-image

The image path will be: build-qemux86broadband/tmp/deploy/images/qemux86broadband/rdk-generic-broadband-image-qemux86broadband.vmdk

Building TDK

Follow the steps as for a normal build, above, but use the following bitbake command:

$ bitbake rdk-generic-broadband-tdk-image

The image path will be: build-qemux86broadband/tmp/deploy/images/qemux86broadband/rdk-generic-broadband-tdk-image-qemux86broadband.vmdk

TDK for RDK-B documentation is available: https://rdkwiki.com/rdk/display/TDK/TDK-B+Release+01

Running the emulator

  1. Start VirtualBox.
  2. Click New -> Enter name -> Select type Linux -> Select version Other Linux (32 bit) -> Click Next
  3. Select Memory size - 512MB -> Click Next
  4. Select option Use an existing virtual hard drive -> Select the built image above -> Click Create
  5. Once the VM has been created, select the new image and click Settings -> Network -> Select Attached to: 'Bridged Adapter' -> Click Ok
  6. Click Start.This will bring up the emulator with the initial splash screen

Known Issues

  • TDK-296 Apparent tear down issue with some TDK-B Python scripts
  • TDK-297 Known TDK-B Emulator setup issues (Port Forwarding and WiFi)
  • TDK-298 Request WIFIAgent_Set fails for RDK-B CMF Emulator testing