fThis is the summary page that describes CMF quarterly release rdkc-2021q3-dunfell, based on the new branch rdk-next and dunfell oe layers. Below are links to the relevant documents.

Note: The master branch has been deprecated in select community repositories and rdk-next is now the lead development branch.

Note: The latest rdkc quarterly release addresses licensing issues so users are advised to move to the latest iteration.

• rdkc-2021q3 RaspberryPi3 Test Report (Gerrit)

Note: For the Gerrit links, you need to log in before you will be able to see the contents.

Baseline

Highlights

Components updated

Community contributions

A detailed changelog since the last release rdkc-2021q2-dunfell can be found here.

Getting the code

Note: The manifests repository is only available to RDK licensees.

mkdir <workspace dir>

cd <workspace dir>

repo init -u https://code.rdkcentral.com/r/manifests -m rdkc-extsrc.xml -b rdkc-2021q3-dunfell 

repo sync -j4 --no-clone-bundle

• The -m rdkc-extsrc.xml in the sequence above is important. If this is not specified, you will get an RDK-V tree by default.
• There is also a nosrc manifest rdkc-nosrc.xml which can be used instead of extsrc
• The -b rdkc-2021q3-dunfell in the build sequence above specifies the branch to use.
• If you omit the -b rdkc-2021q3-dunfell entirely, you will get the HEAD of each component

Building for RaspberryPi0

mkdir <workspace dir>

cd <workspace dir>

repo init -u https://code.rdkcentral.com/r/manifests -m rdkc-extsrc.xml -b rdkc-2021q3-dunfell

repo sync -j4 --no-clone-bundle

MACHINE=raspberrypi0-rdk-camera source meta-cmf-raspberrypi/setup-environment

bitbake rdk-generic-camera-image

# To build TDK image
$ bitbake rdk-generic-camera-tdk-image

Building for RaspberryPi3

mkdir <workspace dir>

cd <workspace dir>

repo init -u https://code.rdkcentral.com/r/manifests -m rdkc-extsrc.xml -b rdkc-2021q3-dunfell

repo sync -j4 --no-clone-bundle

MACHINE=raspberrypi3-rdk-camera source meta-cmf-raspberrypi/setup-environment

bitbake rdk-generic-camera-image

# To build TDK image
$ bitbake rdk-generic-camera-tdk-image

Documentation 

Documentation on the RDK-C reference platforms including host requirement setup and flashing instructions are available from the following links:

RDK Reference Platforms

RDK-C Raspberry Pi

Testing

Sanity Testing

Sanity tests include:

• Flashed the image and verify the initial boot

• Rebooting the RPI multiple times without doing any operation

• WPA status [WIFI Ip] after reboot.

• CVR playback validation using v4l2 source.

TDK Testing

• TDK component tests were run against the release, RPI results are available here.
• TDK Test Lists were based on TDK M92 Release
• Refer to the test release metrics page for detailed test results and comparison to previous releases (available for preferred members only)