Home
[RDK Central Wiki]
CMF
[Code Releases]
Hi all, we are trying to know what is the hardware required to run RDK-B. Could anybody help us filling this table? or pointing out where we could find the info?
CPU | RAM | Flash | |
---|---|---|---|
Min | |||
Typical |
What are the functions that the Min Hardware can support
What are the extra functions that the Typical Hardware can support?
Thanks!
Eduardo.
3 Comments
Sujithra Doss
Hi Eduardo,
A Raspberry Pi 3B with the below configuration can be an ideal minimum requirement to support most of the functionalities for RDK-B.
The configuration of RPi 3B is CPU: Quadcore 1.2 GHz Broadcom BCM2837 64bit with 1GB RAM.
R-Pi 3B would be sufficient for the basic wireless functionality using 2.4GHz. In case of 5 GHz band support R-Pi 3B+ would be good (Note : R-Pi 3B+ doesn’t support simultaneous dual band operations).
Flash: The minimum size is around 285 MB. Anything above this should work just fine for loading/storing the build.
RAM: As far as the logs/database is concerned, anything around 16 MB should be sufficient.
We will get back if there are any changes for a typical setup.
Thanks,
Sujithra.
Eduardo Panciera
Thanks!! I will try to build an image for rPI.
Regards.
Eduardo.
Unknown User (eric.dowek)
Thankls for the information.
Regards,
Eric