CMF
RDK Releases
Documentation
CMF Videos
Support
Support for CMF is provided by the RDK Support group.
To contact RDK Support:
Enter a ticket: https://jira.rdkcentral.com/
or
E-mail: support@rdkcentral.com
Page History
...
A detailed changelog since the last release rdkb-2025q1-kirkstone can be found here.
| Table of Contents |
|---|
Baseline
| Baseline Branch | nightly/20250606-kirkstone |
| Post-baseline updates | |
| TDK | M138 |
| Manifest branch |
|---|
Highlights
Components updated since rdkb-2025q1-kirkstone
| CcspAdvSecurity | halinterface | rdkb/devices/raspberrypi/sysint |
| CcspCMAgent | hotspot | rdkb/tools/tdkb |
| CcspCommonLibrary | libSyscallWrapper | RdkCellularManager |
| CcspCr | libunpriv | RdkCellularManager-MM |
| CcspDmCli | MeshAgent | rdkcentral/bananapi-sysint |
| CcspEthAgent | meta-cmf | rdkcentral/meta-cmf-bananapi |
| CcspHomeSecurity | meta-cmf-broadband | rdkcentral/meta-rdk-wan |
| CcspLMLite | meta-cmf-bsp-emulator | RdkInterDeviceManager |
| CcspMisc | meta-cmf-mesh | RdkPlatformManager |
| CcspMtaAgent | meta-cmf-raspberrypi | RdkTelcoVoiceManager |
| CcspPandM | meta-rdk | rdm |
| CcspPsm | meta-rdk-broadband | rfc |
| CcspSnmpPa | meta-rdk-bsp-emulator | sysint |
| CcspTr069Pa | meta-rdk-ext | telemetry |
| CcspWifiAgent | OneWifi | TestAndDiagnostic |
| CcspXDNS | PowerManager | Utopia |
| CoreNetLib | rdk-wifi-hal | webui |
| crashupload | rdk/tools/tdk | webui-bwg |
| dcm | rdkb/components/generic/harvester | Xconf |
| DhcpManager | rdkb/components/generic/notify_comp | |
| GwProvApp | rdkb/components/generic/startParodus | |
| GwProvApp-EthWan | rdkb/devices/raspberrypi/hal |
Community contributions
A detailed changelog since the last release rdkb-2025q1-kirkstone can be found here.
Getting the code
Note:
- The manifests repository is only available to RDK licensees.
- Opensource versions of the RDKB manifests are available from the rdkcmf/manifests repository rdkb-2025q2-kirkstone branch
...
Building the code
RDKB 2025Q1 Manifests
| Profile | Manifest | Manifest Branch |
|---|---|---|
| RDK-B Gateway 32 Bit | rdkb-2025q2-kirkstone | |
| RDK-B Gateway 64 Bit | rdkb-2025q2-kirkstone | |
| RDK-B Extender 32 Bit | rdkb-2025q2-kirkstone | |
| Banana PI | rdkb-bpi-extsrc.xml rdkb-bpi-nosrc.xml | rdkb-2025q2-kirkstone |
Building for RaspberryPi 4B 32 Bit
...
- Services checks (OneWifi, ccsp processes)
- Network (WAN) connectivity
- LAN client
- Wifi 2.4Ghz and 5Ghz hotspot testing.
- Login, menu navigation, parameter modification, e.g. Wifi SSID/password change and re-connection, changing admin password.
| Test No. | Test | RPI 4 32 Bit | RPI 4 64 Bit |
| 1 | Boot up & SSH access | ✓ | ✓ |
| 2 | Verify SSID name & password | ✓ | ✓ |
| 3 | Captive Portal page | ✓ | ✓ |
| 4 | Check Internet connectivity (Wi-Fi client) | ✓ | ✓ |
| 5 | Check Web UI Launch with local gateway IP and login with admin | ✓ | ✓ |
| 6 | verifying whether it is listing the basic parameters | ✓ | ✓ |
| 7 | Verified the connected devices are listing | ✓ | ✓ |
| 8 | Process Checklist - list of process running and ensure all the CCSP processes are running | ✓ | ✓ |
| 9 | DMCLI Output. Verify it is listing all the parameters | ✓ | ✓ |
Manual Sanity Tests on RPI and BPI:
S.No | Sanity Test | Status 32 Bit | Status 64 bit | Status BPI Nand | Status BPI SD |
1 | erouter0 interface got Wan Ipv4 and Ipv6 address | Pass | Pass | Pass | Pass |
2 | brlan0 interface got default LAN IP | Pass | Pass | Pass | Pass |
3 | Able to take SSH Connection | Pass | Pass | Pass | Pass |
4 | All CCSP process are running | Pass | Pass | Pass | Pass |
5 | Able to Ping www.google.com and Ping -6 www.google.com | Pass | Pass | Pass | Pass |
6 | All systemd services are running | Pass | Pass | Pass | Pass |
7 | Able to connect LAN client | Pass | Pass | Pass | Pass |
8 | LAN client got IP from default pool range (ipv4 & ipv6) | Pass | Pass | Pass | Pass |
9 | LAN client should open with CaptivePortal Page | Pass | Pass | Pass | Pass |
10 | Able to connect wireless client | Pass | Pass | Pass | Pass |
11 | Wireless client got IP from default pool range (ipv4 & ipv6) | Pass | Pass | Pass | Pass |
12 | Wireless client can access the CaptivePortal Page | Pass | Pass | Pass | Pass |
13 | Internet should work on Connected clients after changing the default credentials | Pass | Pass | Pass | Pass |
14 | Using dmcli to check the CCSP TR-181 DataModels | Pass | Pass | Pass | Pass |
15 | WebUI page should be loaded on Connected clients after changing the default credentials | Pass | Pass | Pass | Pass |
16 | WebUI page should be loaded through erouter0IP via RM | Pass | Pass | Pass | Pass |
17 | wlan0 and wlan1 interfaces should be UP and RUNNING | Pass | Pass | Pass | Pass |
18 | All ccsp logs files should be generated in /rdklogs/logs folder | Pass | Pass | Pass | Pass |
19 | Bridge Mode | Pass | Pass | Pass | Pass |
20 | Factory Reset | Pass | Pass | Pass | Pass |
21 | Image Stability | Pass | Pass | Pass | Pass |
TDK & Automatics Testing
- TDK component, VRT and E2E tests were run against the release on both 32 bit and 64 bit builds
- TDK Manager used is TDK-B Release M138
- TDK-B Test Reports - rdkb-2025q2-kirkstone
Overview
Community Forums
Content Tools
Tasks