Page History

...

RDKBACCL-925 [TDK][AUTO][BPI][STABILITY]WiFi SSIDs are not broadcasting consistently in the long run - JIRA
RDKBACCL-965 [TDK][AUTO][BPI]6G capable clients unable to connected to BPI's 6G SSID - JIRA
 
 BPI Stability Issues: 
BPI WiFi seems highly susceptible to interference, so much so that it is not functioning in rack or lab setups, necessitating the use of

1.BPI Wifi works fine in dev setups , but facing interference issues in QA setups where there may be more intereference , resulting in  the TDK using the WiFi chamber for testing.

2.The fan unit have to kept as below to avoid overheating, this may be hardware limitation

     2.1  Cable which provide power supply to fan in BPI should be loosely connected in given pin

3. In open lab environment, BPI stops broadcasting all WiFi SSIDs and the WiFi functionality will not be restored even on reboot or factory reset.
The fan unit is not functioning when connected as per BananaPi’s official documentation, resulting in overheating of the devices.
WiFi 6GHz is not working with all most of the 6GHz capable STAs/clients.

TDK & Automatics Testing

• TDK component, VRT, Cellular Manager and E2E tests were run against the release on both 32 bit and 64 bit builds
• TDK Manager used is TDK-B Release M138
• TDK-B Test Reports - rdkb-2025q2-kirkstone