CMF
RDK Releases
Documentation
CMF Videos
Support
Support for CMF is provided by the RDK Support group.
To contact RDK Support:
Enter a ticket: https://jira.rdkcentral.com/![]()
or
E-mail: support@rdkcentral.com![]()
...
| Sl.No | Sanity tested on | Status |
| 1 | erouter0 interface got Wan IPv4 | Pass |
| 2 | brlan0 interface got default LAN IP with Ipv4 | Pass |
| 3 | Able to take SSH Connection | Pass |
| 4 | All CCSP process are running | Pass |
| 5 | Able to Ping www.google.com | Pass |
| 6 | All systemd services are running | Pass |
| 7 | Able to connect LAN client | Pass |
| 8 | LAN client got IP from default pool range | Pass |
| 9 | LAN client should open with CaptivePortal Page | Pass |
| 10 | Able to connect wireless client | Pass |
| 11 | Wireless client got IP from default pool range | Pass |
| 12 | Wireless client can access the CaptivePortal Page | Pass |
| 13 | Internet should work on Connected clients after changing the default credentials | Pass |
| 14 | Using dmcli to check the CCSP TR-181 DataModels | Pass |
| 15 | WebUI page should be loaded on Connected clients after changing the default credentials | Pass |
| 16 | WebUI page should be loaded through erouter0 IP via RM | Pass |
| 17 | Wlan0 and Wlan1 interfaces should be UP and RUNNING | Pass |
| 18 | All ccsp logs files should be generated in /rdklogs/logs folder | Pass |
| 19 | Bridge Mode | Pass |
| 20 | Factory Reset | Pass |
| 21 | Image Stability | Pass |
| 22 | IPv6 Test with wireless & LAN client connection | Pass |
| Sl No | PLUGINS | Status | Comment |
| 1 | Basic-Sanity | PASS | |
| 2 | Log-Upload & Telemetry | PASS | |
| 3 | Bridge-Mode | FAIL | Admin UI page in not loading – RDKBACCL-512 |
| 4 | Celluar Manager | PASS | |
| 5 | ACS | PASS | |
| 6 | WebPA | PASS | |
| 7 | SNMP | FAIL | FAIL (get/set not working - RDKBACCL-1468) |
| 8 | WebConfig | SKIPPED | |
| 9 | eSDK | FAIL | RDKBACCL-1102 (buildtool is not working) |
| 10 | Multiprofile | PASS | |
| 11 | Selfheal | PASS | |
| 12 | Log-Rotation | PASS | |
| 13 | DAC | PASS | |
| 14 | RFC | PASS | |
| 15 | Firmware Upgrade | PASS | |
| 16 | WebUI | PASS | |
| 17 | Parental-Control | PASS | |
| 18 | WebUI-Advanced | PASS | |
| 19 | WPS | PASS | |
| 20 | Populate-SDK | PASS | |
| 21 | Firewall | PASS | |
| 22 | USP-PA(oktopus) | PASS | |
| 23 | Telco-Voice | PASS | |
| 24 | IPV6 | PASS | |
| 25 | USB detection | SKIPPED | |
| 26 | RNDIS | PASS | |
| 27 | Crash upload | PASS | |
| 28 | Speedtest | PASS | |
| 29 | MAC Filtering | PASS | |
| 30 | Remote Debugger | PASS | |
| 31 | Barton | PASS | |
| 32 | Map T | SKIPPED | Setup not available to verify |
Performed Sanity with https://github.com/rdkcentral/meta-cmf-bananapi/pull/453 cherry picked on release branch
| Sl.No | Sanity tested on | Status |
| 1 | erouter0 interface got Wan IPv4 | Pass |
| 2 | brlan0 interface got default LAN IP with Ipv4 | Pass |
| 3 | Able to take SSH Connection | Pass |
| 4 | All CCSP process are running | Pass |
| 5 | Able to Ping www.google.com | Pass |
| 6 | All systemd services are running | Pass |
| 7 | Able to connect LAN client | Pass |
| 8 | LAN client got IP from default pool range | Pass |
| 9 | LAN client should open with CaptivePortal Page | Pass |
| 10 | Able to connect wireless client | Pass |
| 11 | Wireless client got IP from default pool range | Pass |
| 12 | Wireless client can access the CaptivePortal Page | Pass |
| 13 | Internet should work on Connected clients after changing the default credentials | Pass |
| 14 | Using dmcli to check the CCSP TR-181 DataModels | Pass |
| 15 | WebUI page should be loaded on Connected clients after changing the default credentials | Pass |
| 16 | WebUI page should be loaded through erouter0 IP via RM | Pass |
| 17 | Wlan0 and Wlan1 interfaces should be UP and RUNNING | Pass |
| 18 | All ccsp logs files should be generated in /rdklogs/logs folder | Pass |
| 19 | Bridge Mode | Pass |
| 20 | Factory Reset | Pass |
| 21 | Image Stability | Pass |
BPI Stability Issues:
...