CMF
RDK Releases
Documentation
CMF Videos
Support
Support for CMF is provided by the RDK Support group.
To contact RDK Support:
Enter a ticket: https://jira.rdkcentral.com/
or
E-mail: support@rdkcentral.com
Page History
...
- TDK component, VRT, Cellular Manager and E2E tests were run against the release on both 32 bit and 64 bit builds
- TDK Manager used is TDK-B Release M147
- TDK-B Test Reports - rdkb-2026q1-kirkstone
...
Known Issues
...
Default GW Build
| Issue | Jira | Note |
|---|---|---|
| eSDK is not working | RDKBACCL-1102 | eSDK FAIL in 2026 Q1 release. PopulateSDK is PASS. Under investigation. |
| WebUi page is not loaded in bridge mode | RDKBACCL-512 | Issue is there from Q4 2024 |
| SNMP get/set is not working | RDKBACCL-1468 | Issue observed with MLO enabled builds |
| When we change the LAN IP in WebUI, it is not getting reflected in brlan0 interface |
Known issues in WiFiagent build
| Issue | Jira | Note |
|---|---|---|
Unable to connect WiFi clients | RDKBACCL-1685 | This is caused by continuous hostapd restart due to a driver-level crash triggered by the MAC-ACL patch. After excluding this patch for WifiAgent builds, clients were able to connect successfully on every boot. Fix: https://github.com/rdkcentral/meta-cmf-bananapi/pull/453 |
| LAN clients are not working after device reboot in Bridge mode | RDKBACCL-1755 | In bridge mode, LAN clients were not getting IP after reboot because erouter0 was not added to brlan0 as EthAgent started late. After the workaround fix, erouter0 was renamed successfully within 1 minute. But working on the actual root cause for this and those changes will be updated in the next release. Workaround Fix: https://github.com/rdkcentral/meta-cmf-bananapi/pull/457/changes |
Non MLO build
| Issue | Jira | Note |
|---|---|---|
| Observing build issues when we disable generic_mlo distro in BPI RDKB builds | RDKBACCL-1651 | validate wifi 7 use case by disabling MLO and test with SLO alone AWAITING CODE MERGE Observing build issues when we disable generic_mlo distro in BPI RDKB builds Fix : https://github.com/rdkcentral/meta-cmf-bananapi/pull/460 |
BPI Stability Issues:
- Depending on your setup environment, you may face interference issues (e.g. in a lab with a lot of WiFi devices). If you encounter such issues we recommend to use a WiFi chamber. A simple desktop setup should not encounter such issues.
- The Fan unit needs to be setup correctly to avoid overheating. After connecting the powersupply (white jack) to the fan ensure the jack makes proper contact with the pin, see RDK-B Banana Pi R4 Setup and Flashing Instructions.
- WiFi 6GHz does not work with all 6GHz capable STAs/clients, we recommend to use an Apple iphone-16 pro as of now if you wish to use Wifi 6GHz.
...
Overview
Community Forums
Content Tools
Tasks