Page History

...

This is the summary page that describes the CMF iteration rdkb-2019020720190206. This iteration is based on the new branch rdk-next. Below are links to the relevant documents for the iteration.

Note: The latest rdkb iteration addresses licensing issues so users are advised to move to the latest iteration.

• rdkb-20190207 20190206 Emulator Test Report (Gerrit)
• rdkb-20190207 20190206 RaspberryPi Test Report (Gerrit)

Note: For the Gerrit links, you need to log in before you will be able to see the contents.

A detailed changelog since the last iteration RDK-B_20180527 can be found here.

Baseline

Highlights since RDK-B_20180527

...

• Opensourced components:

  • rdkb/devices/raspberrypi/sysint, rdkb/devices/ci20/hal, rdkb/components/opensource/ccsp/GwProvApp-EthWan, rdkb/components/opensource/ccsp/MeshAgent, rdkb/components/opensource/ccsp/CcspEthAgent

• Components updated:

  • All components have been updated to incorporate an rdk-next branch.

• Patches:

  • Separate patch files for the open-source OE layers are no longer maintained. Instead, mirrors of the OE layers used by RDK are maintained at CMF, containing rdk branches that contain the patches already applied. The RDK build scripts and recipes now all use these instead of the previous patches.

  Community contributions:

  • A detailed changelog since the last iteration RDK-B_20180527 can be found here.

Getting the code

Note: The manifests repository is only available to RDK licensees.

$ mkdir rdkb
$ cd rdkb
$ repo init -u https://code.rdkcentral.com/r/manifests -m rdkb.xml -b rdkb-2019020720190206
$ repo sync -j4 --no-clone-bundle

...

• The -m rdkb.xml in the build sequence above is important. If this is not specified, you will get an RDK-V tree by default.
• The -b rdkb-20190207 20190206 in the build sequence above specifies the branch to use.
• If you omit the -b rdkb-20190207 20190206 entirely, you will get the master (HEAD) of each component.
• At any time, the community can build latest master by dropping the -b rdkb-20190207 20190206 option in the repo init command.

...

Building for the emulator

$ source meta-cmf-bsp-emulator/setup-environment (select qemux86broadband-morty)
$ bitbake rdk-generic-broadband-image

...

To build TDK, follow the steps as for a normal build, above, but use the following bitbake command:

$ bitbake rdk-generic-broadband-tdk-image

...

1. Start VirtualBox.
2. Click New -> Enter name -> Select type Linux -> Select version Other Linux (32 bit) -> Click Next
3. Select Memory size - 512MB -> Click Next
4. Select option Use an existing virtual hard drive -> Select the built image above -> Click Create
5. Once the VM has been created, select the new image and click Settings -> Network -> Select Attached to: 'Bridged Adapter' -> Click Ok
6. Click Start. This will bring up the emulator with the initial splash screen

Building for RaspberryPi

$ mkdir <workspace dir>
$ cd <workspace dir>
$ repo init -u https://code.rdkcentral.com/r/manifests -m rdkb.xml -b rdkb-2019020720190206
$ repo sync -j4 --no-clone-bundle
$ source meta-cmf-raspberrypi/setup-environment

Select option raspberrypi-rdk-broadband.conf

$ bitbake rdk-generic-broadband-image

...