CMF
RDK Releases
Documentation
CMF Videos
Support
Support for CMF is provided by the RDK Support group.
To contact RDK Support:
Enter a ticket: https://jira.rdkcentral.com/
or
E-mail: support@rdkcentral.com
Page History
...
Note: The latest rdkb quarterly release addresses licensing issues so users are advised to move to the latest iteration.
For the Gerrit links, you need to log in before you will be able to see the contents.
A detailed changelog since the last release rdkb-2025q1-kirkstone can be found here.
| Table of Contents |
|---|
Baseline
| Baseline Branch | nightly/20250606-kirkstone |
| Post-baseline updates | |
| TDK | M138 |
| Manifest branch |
|---|
Highlights
Components updated since rdkb-2025q1-kirkstone
| CcspAdvSecurity |
| jst | RdkCellularManager |
| CcspCMAgent |
| LanManager |
| rdkcentral/bananapi-sysint | |
| CcspCommonLibrary | libSyscallWrapper |
| rdkcentral/DSM |
| CcspEPONAgent | libunpriv |
| rdkcentral/meta-cmf-bananapi |
| CcspEthAgent |
| MeshAgent | rdkcentral/meta- |
| rdk- |
| wan | |
| CcspHomeSecurity | meta-cmf |
| RdkInterDeviceManager |
| CcspLMLite | meta-cmf- |
| broadband |
| RdkLedManager | ||
| CcspMisc | meta-cmf-mesh | RdkPlatformManager |
| CcspMoCA | meta-cmf-raspberrypi | RdkTelcoVoiceManager |
| CcspMtaAgent | meta-rdk | rdm |
| CcspPandM | meta-rdk-broadband | rfc |
| CcspPsm | meta-rdk- |
| ext | sysint |
| CcspSnmpPa | OvsAgent | TestAndDiagnostic |
| CcspTr069Pa | rdk_logger | Utopia |
| CcspWifiAgent | rdk |
| /components/opensource/oe/meta-raspberrypi | WebconfigFramework |
| CcspXDNS |
| rdk/tools/tdk | webui |
| CoreNetLib | rdkb/components/generic/harvester |
| webui-bwg |
| crashupload | rdkb/components/generic/notify_comp | Xconf |
| GwProvApp | rdkb/components/generic/startParodus |
| halinterface | rdkb/devices/raspberrypi/hal | |
| hotspot | rdkb/tools/tdkb |
Community contributions
A detailed changelog since the last release rdkb-2025q1-kirkstone can be found here.
License Manifests
- RDKB-2025q2-kirkstone RPi4 32bit Broadband License Manifest Repor
- RDKB-2025q2-kirkstone RPi4 64bit Broadband License Manifest Report
- RDKB-2025q2-kirkstone RPi4 32bit Extender License Manifest Report
- RDKB-2025q2-kirkstone Banana Pi Broadband License Manifest Report
Getting the code
Note:
- The manifests repository is only available to RDK licensees.
- Opensource versions of the RDKB manifests are available from the rdkcmf/manifests repository rdkb-2025q2-kirkstone branch
...
- The -m <manifest.xml> in the sequence above is important. If this is not specified, you will get an RDK-V tree by default.
For RPI builds use manifest: rdkb.xml
Code Block language bash theme DJango repo init -u https://code.rdkcentral.com/r/rdkcmf/manifests -m rdkb-extsrc.xml -b rdkb-2025q2-kirkstone
- The -b rdkb-2024q42025q2-kirkstone in the build sequence above specifies the branch to use.
- If you omit the -b rdkb-2024q42025q2-kirkstone entirely, you will get the HEAD of each component
Building the code
RDKB
...
2025Q2 Manifests
| Profile | Manifest | Manifest Branch |
|---|---|---|
| RDK-B Gateway 32 Bit | rdkb-2025q2-kirkstone | |
| RDK-B Gateway 64 Bit | rdkb-2025q2-kirkstone | |
| RDK-B Extender 32 Bit | rdkb-2025q2-kirkstone | |
| Banana PI | rdkb-bpi-extsrc.xml rdkb-bpi-nosrc.xml | rdkb-2025q2-kirkstone |
Building for RaspberryPi 4B 32 Bit
...
RDK-B (Raspberry Pi) Build and Setup Manual - Router Profile
RDK-B Banana Pi R4 - 2025Q1 2025Q2 Release(March July 2025)
RDK-B Banana Pi R4 Setup and Flashing Instructions
Kirkstone (Yocto 4.0) Migration - RDK-B
...
- Services checks (OneWifi, ccsp processes)
- Network (WAN) connectivity
- LAN client
- Wifi 2.4Ghz and 5Ghz hotspot testing.
- Login, menu navigation, parameter modification, e.g. Wifi SSID/password change and re-connection, changing admin password.
| Test No. | Test | RPI 4 32 Bit | RPI 4 64 Bit |
| 1 | Boot up & SSH access | ✓ | ✓ |
| 2 | Verify SSID name & password | ✓ | ✓ |
| 3 | Captive Portal page | ✓ | ✓ |
| 4 | Check Internet connectivity (Wi-Fi client) | ✓ | ✓ |
| 5 | Check Web UI Launch with local gateway IP and login with admin | ✓ | ✓ |
| 6 | verifying whether it is listing the basic parameters | ✓ | ✓ |
| 7 | Verified the connected devices are listing | ✓ | ✓ |
| 8 | Process Checklist - list of process running and ensure all the CCSP processes are running | ✓ | ✓ |
| 9 | DMCLI Output. Verify it is listing all the parameters | ✓ | ✓ |
Manual Sanity Tests on RPI and BPI:
S.No | Sanity Test | Status 32 Bit | Status 64 bit | Status BPI Nand | Status BPI SD |
1 | erouter0 interface got Wan Ipv4 and Ipv6 address | Pass | Pass | Pass | Pass |
2 | brlan0 interface got default LAN IP | Pass | Pass | Pass | Pass |
3 | Able to take SSH Connection | Pass | Pass | Pass | Pass |
4 | All CCSP process are running | Pass | Pass | Pass | Pass |
5 | Able to Ping www.google.com and Ping -6 www.google.com | Pass | Pass | Pass | Pass |
6 | All systemd services are running | Pass | Pass | Pass | Pass |
7 | Able to connect LAN client | Pass | Pass | Pass | Pass |
8 | LAN client got IP from default pool range (ipv4 & ipv6) | Pass | Pass | Pass | Pass |
9 | LAN client should open with CaptivePortal Page | Pass | Pass | Pass | Pass |
10 | Able to connect wireless client | Pass | Pass | Pass | Pass |
11 | Wireless client got IP from default pool range (ipv4 & ipv6) | Pass | Pass | Pass | Pass |
12 | Wireless client can access the CaptivePortal Page | Pass | Pass | Pass | Pass |
13 | Internet should work on Connected clients after changing the default credentials | Pass | Pass | Pass | Pass |
14 | Using dmcli to check the CCSP TR-181 DataModels | Pass | Pass | Pass | Pass |
15 | WebUI page should be loaded on Connected clients after changing the default credentials | Pass | Pass | Pass | Pass |
16 | WebUI page should be loaded through erouter0IP via RM | Pass | Pass | Pass | Pass |
17 | wlan0 and wlan1 interfaces should be UP and RUNNING | Pass | Pass | Pass | Pass |
18 | All ccsp logs files should be generated in /rdklogs/logs folder | Pass | Pass | Pass | Pass |
19 | Bridge Mode | Pass | Pass | Pass | Pass |
20 | Factory Reset | Pass | Pass | Pass | Pass |
21 | Image Stability | Pass | Pass | Pass |
Jira server JIRA serverId 11deff04-0380-3a3d-a916-0849d4e573f7 key REFPLTB-3464 Jira server JIRA serverId 11deff04-0380-3a3d-a916-0849d4e573f7 key RDKBACCL-874
Known Issues
RDKBACCL-925 [TDK][AUTO][BPI][STABILITY]WiFi SSIDs are not broadcasting consistently in the long run - JIRA
RDKBACCL-965 [TDK][AUTO][BPI]6G capable clients unable to connected to BPI's 6G SSID - JIRA
BPI Stability Issues:
- Depending on your setup environment, you may face interference issues (e.g. in a lab with a lot of WiFi devices). If you encounter such issues we recommend to use a WiFi chamber. A simple desktop setup should not encounter such issues.
- The Fan unit needs to be setup correctly to avoid overheating. After connecting the powersupply (white jack) to the fan ensure the jack makes proper contact with the pin, see RDK-B Banana Pi R4 Setup and Flashing Instructions.
- WiFi 6GHz does not work with all 6GHz capable STAs/clients, we recommend to use an Apple iphone-16 pro as of now if you wish to use Wifi 6GHz.
TDK & Automatics Testing
- TDK component, VRT, Cellular Manager and E2E tests were run against the release on both 32 bit and 64 bit builds
- TDK Manager used is TDK-B Release M138
- TDK-B Test Reports - rdkb-2025q2-kirkstone
Overview
Community Forums
Content Tools
Tasks