CMF
RDK Releases
Documentation
CMF Videos
Support
Support for CMF is provided by the RDK Support group.
To contact RDK Support:
Enter a ticket: https://jira.rdkcentral.com/
or
E-mail: support@rdkcentral.com
Page History
Work In Progress
This is the summary page that describes the CMF kirkstone quarterly release rdkb-2026q2-kirkstone.
...
| Sl No | PLUGINS | Status | Comment |
| 1 | Basic-Sanity | PASS | |
| 2 | Log-Upload & Telemetry | PASS | |
| 3 | Bridge-Mode | PASS | Device rebooted in Bridge mode and then switched to router mode - Unable to connect WiFi clients. Similar to RDKBACCL-2006 |
| 4 | Celluar Manager | FAIL | RDKBACCL-2006 |
| 5 | ACS | PASS | |
| 6 | WebPA | PASS | |
| 7 | SNMP | PASS | |
| 8 | WebConfig | PASS | |
| 9 | eSDK | FAIL | RDKBACCL-1102 |
| 10 | Multiprofile | PASS | |
| 11 | Selfheal | PASS | |
| 12 | Log-Rotation | PASS | |
| 13 | DAC | PASS | |
| 14 | RFC | PASS | |
| 15 | Firmware Upgrade | PASS | |
| 16 | WebUI | FAIL | RDKBACCL-1993 |
| 17 | Parental-Control | PASS | |
| 18 | WebUI-Advanced | PASS | |
| 19 | WPS | PASS | |
| 20 | Populate-SDK | PASS | |
| 21 | Firewall | PASS | |
| 22 | USP-PA(oktopus) | PASS | |
| 23 | Telco-Voice | PASS | |
| 24 | IPV6 | PASS | |
| 25 | USB detection | PASS | |
| 26 | RNDIS | FAIL | RDKBACCL-2006 |
| 27 | Crash upload | PASS | |
| 28 | Speedtest | PASS | |
| 29 | MAC Filtering | PASS | |
| 30 | Remote Debugger | PASS | |
| 31 | Barton | PASS | |
| 32 | MLO Config via TR-181 DM | PASS | |
| 33 | Map T | PASS |
CcspWifiAgent Build:
...
| Sl.No | Sanity tested on | Status |
| 1 | erouter0 interface got Wan IPv4 | Pass |
| 2 | brlan0 interface got default LAN IP with Ipv4 | Pass |
| 3 | Able to take SSH Connection | Pass |
| 4 | All CCSP process are running | Pass |
| 5 | Able to Ping www.google.com | Pass |
| 6 | All systemd services are running | Pass |
| 7 | Able to connect LAN client | Pass |
| 8 | LAN client got IP from default pool range | Pass |
| 9 | LAN client should open with CaptivePortal Page | Pass |
| 10 | Able to connect wireless client | Pass |
| 11 | Wireless client got IP from default pool range | Pass |
| 12 | Wireless client can access the CaptivePortal Page | Pass |
| 13 | Internet should work on Connected clients after changing the default credentials | Pass |
| 14 | Using dmcli to check the CCSP TR-181 DataModels | Pass |
| 15 | WebUI page should be loaded on Connected clients after changing the default credentials | Pass |
| 16 | WebUI page should be loaded through erouter0 IP via RM | Pass |
| 17 | Wlan0 and Wlan1 interfaces should be UP and RUNNING | Pass |
| 18 | All ccsp logs files should be generated in /rdklogs/logs folder | Pass |
| 19 | Bridge Mode | Pass |
| 20 | Factory Reset | Pass |
| 21 | Image Stability | Pass |
...
IN PROGRESS WILL UPDATE RESULTS WHEN COMPLETE
...
Known Issues
Default GW Build
| Issue | Jira | Note | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| eSDK is not working |
| eSDK FAIL in 2026 Q1 release. PopulateSDK is PASS. Under investigation. | ||||||||
| WebUi page is not loaded in bridge mode | RDKBACCL-512 | Issue is there from Q4 2024 | ||||||||
| SNMP get/set is not working | RDKBACCL-1468 | Issue observed with MLO enabled builds | When we change the LAN IP in WebUI, it is not getting reflected in brlan0 interface |
Known issues in WiFiagent build
...
Unable to connect WiFi clients
...
This is caused by continuous hostapd restart due to a driver-level crash triggered by the MAC-ACL patch. After excluding this patch for WifiAgent builds, clients were able to connect successfully on every boot.
Fix: https://github.com/rdkcentral/meta-cmf-bananapi/pull/453
...
| WiFi Clients are not working after device reboot in LTE and RNDIS mode |
| Recent regression | ||||||||
WiFi SSIDs are going down when we change the any Operating mode (802.11 g/n/ax/be) for any radio from WebUI |
| Recent regression |
Non MLO build
| Issue | Jira | Note |
|---|---|---|
| Observing build issues when we disable generic_mlo distro in BPI RDKB builds | RDKBACCL-1651 | validate wifi 7 use case by disabling MLO and test with SLO alone AWAITING CODE MERGE Observing build issues when we disable generic_mlo distro in BPI RDKB builds Fix : https://github.com/rdkcentral/meta-cmf-bananapi/pull/460 |
BPI Stability Issues:
- Depending on your setup environment, you may face interference issues (e.g. in a lab with a lot of WiFi devices). If you encounter such issues we recommend to use a WiFi chamber. A simple desktop setup should not encounter such issues.
- The Fan unit needs to be setup correctly to avoid overheating. After connecting the powersupply (white jack) to the fan ensure the jack makes proper contact with the pin, see RDK-B Banana Pi R4 Setup and Flashing Instructions.
- WiFi 6GHz does not work with all 6GHz capable STAs/clients, we recommend to use an Apple iphone-16 pro as of now if you wish to use Wifi 6GHz.
...
Overview
Community Forums
Content Tools
Tasks