Versions Compared

Old Version 11

changes.mady.by.user James Cooley

Saved on

compared with

New Version Current

changes.mady.by.user James Cooley

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Work In Progress

This is the summary page that describes the CMF kirkstone quarterly release rdkb-2026q2-kirkstone. 

...

IN PROGRESS WILL UPDATE RESULTS WHEN COMPLETE

...


Known Issues

 Default GW Build

IssueJiraNote
eSDK is not working

Jira
serverJIRA
serverId11deff04-0380-3a3d-a916-0849d4e573f7
keyRDKBACCL-1102

eSDK FAIL in 2026 Q1 release. PopulateSDK is PASS. Under investigation.
WebUi page is not loaded in bridge modeRDKBACCL-512Issue is there from Q4 2024
SNMP get/set is not workingRDKBACCL-1468Issue observed with MLO enabled builds
When we change the LAN IP in WebUI, it is not getting reflected in brlan0 interface

Known issues in WiFiagent build

...

Unable to connect WiFi clients

...

This is caused by continuous hostapd restart due to a driver-level crash triggered by the MAC-ACL patch. After excluding this patch for WifiAgent builds, clients were able to connect successfully on every boot.

Fix: https://github.com/rdkcentral/meta-cmf-bananapi/pull/453

...

WiFi Clients are not working after device reboot in LTE and RNDIS mode

Jira
serverJIRA
serverId11deff04-0380-3a3d-a916-0849d4e573f7
keyRDKBACCL-2006

Recent regression

WiFi SSIDs are going down when we change the any Operating mode (802.11 g/n/ax/be)

for any radio from WebUI

Jira
serverJIRA
serverId11deff04-0380-3a3d-a916-0849d4e573f7
keyRDKBACCL-1993

Recent regression

Non MLO build

IssueJiraNote
Observing build issues when we disable generic_mlo distro in BPI RDKB buildsRDKBACCL-1651validate wifi 7 use case by disabling MLO and test with SLO alone AWAITING CODE MERGE
Observing build issues when we disable generic_mlo distro in BPI RDKB builds
Fix : https://github.com/rdkcentral/meta-cmf-bananapi/pull/460


 BPI Stability Issues:

  1. Depending on your setup environment, you may face interference issues (e.g. in a lab with a lot of WiFi devices). If you encounter such issues we recommend to use a WiFi chamber. A simple desktop setup should not encounter such issues.
  2. The Fan unit needs to be setup correctly to avoid overheating.  After connecting the powersupply (white jack) to the fan ensure the jack makes proper contact with the pin, see RDK-B Banana Pi R4 Setup and Flashing Instructions.
  3. WiFi 6GHz does not work with all 6GHz capable STAs/clients, we recommend to use an Apple iphone-16 pro as of now if you wish to use Wifi 6GHz.

...