Versions Compared

Old Version 9

changes.mady.by.user James Cooley

Saved on

compared with

New Version Current

changes.mady.by.user Manigandan Gopalakrishnan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Note: The latest rdkb quarterly release addresses licensing issues so users are advised to move to the latest iteration.

For the Gerrit links, you need to log in before you will be able to see the contents.


Table of Contents

Baseline

...

FAILSKIPPED
Sl NoPLUGINSStatusComment
1Basic-SanityPASS
2Log-Upload & TelemetryPASS
3Bridge-ModePASSKnown issue: Admin UI page in not loading – RDKBACCL-512
4Celluar ManagerPASS 
5ACSPASS
6WebPAPASS
7SNMPFAILFAIL (get/set not working - RDKBACCL-1468)
8WebConfigSKIPPEDFaced access issue with RDKM webconfig server.
9eSDKFAILRDKBACCL-1102 (buildtool is not working)
10MultiprofilePASS
11SelfhealPASS
12Log-RotationPASS
13DACPASS
14RFCPASS 
15Firmware UpgradePASS
16WebUIPASS
17Parental-ControlPASS
18WebUI-AdvancedPASS
19WPSPASS 
20Populate-SDKPASS
21FirewallPASS
22USP-PA(oktopus)PASS
23Telco-VoicePASS
24IPV6PASS
25USB detectionPASS(Partial)USB storage device is detected but not mounting
26RNDISPASS
27Crash uploadPASS
28SpeedtestPASS
29MAC FilteringPASS
30Remote DebuggerPASS
31BartonPASS
32Map TSKIPPEDSetup not available to verify

...

...


Known Issues

...

 Default GW Build

IssueJiraNote
eSDK is not workingRDKBACCL-1102eSDK FAIL in 2026 Q1 release. PopulateSDK is PASS. Under investigation.
WebUi page is not loaded in bridge modeRDKBACCL-512Issue is there from Q4 2024
SNMP get/set is not workingRDKBACCL-1468Issue observed with MLO enabled builds
When we change the LAN IP in WebUI, it is not getting reflected in brlan0 interface

Known issues in WiFiagent build

IssueJiraNote

Unable to connect WiFi clients

RDKBACCL-1685

This is caused by continuous hostapd restart due to a driver-level crash triggered by the MAC-ACL patch. After excluding this patch for WifiAgent builds, clients were able to connect successfully on every boot.

Fix: https://github.com/rdkcentral/meta-cmf-bananapi/pull/453

LAN clients are not working after device reboot in Bridge modeRDKBACCL-1755In bridge mode, LAN clients were not getting IP after reboot because erouter0 was not added to brlan0 as EthAgent started late. After the workaround fix, erouter0 was renamed successfully within 1 minute. But working on the actual root cause for this and those changes will be updated in the next release.
Workaround Fix: https://github.com/rdkcentral/meta-cmf-bananapi/pull/457/changes

Non MLO build

IssueJiraNote
Observing build issues when we disable generic_mlo distro in BPI RDKB buildsRDKBACCL-1651validate wifi 7 use case by disabling MLO and test with SLO alone AWAITING CODE MERGE
Observing build issues when we disable generic_mlo distro in BPI RDKB builds
Fix : https://github.com/rdkcentral/meta-cmf-bananapi/pull/460

 BPI Stability Issues:

  1. Depending on your setup environment, you may face interference issues (e.g. in a lab with a lot of WiFi devices). If you encounter such issues we recommend to use a WiFi chamber. A simple desktop setup should not encounter such issues.
  2. The Fan unit needs to be setup correctly to avoid overheating.  After connecting the powersupply (white jack) to the fan ensure the jack makes proper contact with the pin, see RDK-B Banana Pi R4 Setup and Flashing Instructions.
  3. WiFi 6GHz does not work with all 6GHz capable STAs/clients, we recommend to use an Apple iphone-16 pro as of now if you wish to use Wifi 6GHz.

...