Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

This is the summary page that describes the CMF RDK-B release 2.1-20161107. 

Below are links to the relevant documents for the release.

For the Gerrit links, you need to log in before you will be able to see the contents.

 

The latest RDK-B release addresses licensing issues so users are advised to move to the latest release.

Baseline

 

Baseline

CMF-20161107

2016-11-07 baseline.
Post-baseline updates  
TDKM41

https://rdkwiki.com/rdk/display/TDK/TDK-B+Release+01

Manifestrdkb-2.1-20161107 

Highlights since 2.1-20161024

  • New components: None.
  • Components updated:
    • CcspCMAgent, CcspCommonLibrary, CcspCr, CcspLMLite, CcspPandM, CcspPsm, CcspTr069Pa, CcspWecbController, CcspWifiAgent, TestAndDiagnostic, Utopia, webui, rdkbemu_xb3.
  • Patches updated: None.
  • Community contributions: None.

Getting the code

$ mkdir rdkb
$ cd rdkb
$ repo init -u https://code.rdkcentral.com/r/manifests -m rdkb.xml -b rdkb-2.1-20161107
$ repo sync -j4 --no-clone-bundle
  • The -m rdkb.xml in the build sequence above is important. If this is not specified, you will get an RDK-V tree by default.
  • The -b rdkb-2.1-20161107 in the build sequence above specifies the branch to use. If you omit the -b rdkb-2.1-20161107 entirely, you will get the master (HEAD) of each component.
  • At any time, the community can build latest master by dropping the -b rdkb-2.1-20161107 option in the repo init command.
  • We have verified that this iteration boots to a login prompt and that you can log in, and that you can connect with a web browser to the web admin page, but that is the extent of the testing at this time.

Building the code

$ source meta-cmf-rdkb-bsp-emulator/setup-environment (select qemux86broadband)
$ bitbake rdk-generic-broadband-image

The image path will be: build-qemux86broadband/tmp/deploy/images/qemux86broadband/rdk-generic-broadband-image-qemux86broadband.vmdk

Building TDK

Follow the steps as for a normal build, above, but use the following bitbake command:

$ bitbake rdk-generic-broadband-tdk-image

The image path will be: build-qemux86broadband/tmp/deploy/images/qemux86broadband/rdk-generic-broadband-tdk-image-qemux86broadband.vmdk

TDK for RDK-B documentation is available: https://rdkwiki.com/rdk/display/TDK/TDK-B+Release+01

Running the emulator

  1. Start VirtualBox.
  2. Click New -> Enter name -> Select type Linux -> Select version Other Linux (32 bit) -> Click Next
  3. Select Memory size - 512MB -> Click Next
  4. Select option Use an existing virtual hard drive -> Select the built image above -> Click Create
  5. Once the VM has been created, select the new image and click Settings -> Network -> Select Attached to: 'Bridged Adapter' -> Click Ok
  6. Click Start.This will bring up the emulator with the initial splash screen

Known Issues

  • TDK-301 TDK Manager device status occasionally out of sync
  • TDK-302 Undocumented TDK (TCL script) run-time config changes on target device
  • TDK-303 Configured SSID ignored by some TDK scripts
  • TDK-304 PAM Component test script tear down issue
  • TDK-305 TCL test deletes client wifi profile without restoring it