This is the summary page that describes the CMF RDK-B iteration rdkb-20170313.

Below are links to the relevant documents for the release.

For the Gerrit links, you need to log in before you will be able to see the contents.

 

The latest RDK-B release addresses licensing issues so users are advised to move to the latest release.


Baseline

 

BaselineCMF-201703132017-03-13 baseline.
Post-baseline updates  
TDKM45

https://rdkwiki.com/rdk/display/TDK/TDK+Release+M45

Manifestrdkb-20170313 

Highlights since 20170227

  • New components: None.
  • Components updated:
    • rdkb/components/opensource/ccsp/CcspDmCli, rdkb/components/opensource/ccsp/CcspHomeSecurity, rdkb/components/opensource/ccsp/CcspMisc, rdkb/components/opensource/ccsp/CcspMoCA, rdkb/components/opensource/ccsp/CcspMtaAgent, rdkb/components/opensource/ccsp/CcspPandM, rdkb/components/opensource/ccsp/CcspTr069Pa, rdkb/components/opensource/ccsp/CcspWecbController, rdkb/components/opensource/ccsp/GwProvApp, rdkb/components/opensource/ccsp/TestAndDiagnostic, rdkb/components/opensource/ccsp/Utopia, rdkb/components/opensource/ccsp/hal, rdkb/components/opensource/ccsp/halinterface, rdkb/components/opensource/ccsp/servicemanager, rdkb/components/opensource/ccsp/sysint, rdkb/components/opensource/ccsp/webui, rdkb/devices/raspberrypi/hal, rdkb/devices/rdkbemu/ccsp/rdkb.
  • Patches updated: None.
  • Community contributions: 
    • 8186 (RDKBCMF-56) :Wifi Status is not reflecting on WebUI
    • 7885 RDKB-148 : Parental Control - Block/Allow Device based on Time Not Working For IPv6
    • 7556 (RDKBCMF-43) : Managed Service validation is getting failed on webUI in case of protocol: TCP/UDP
    • 7536 (RDKBCMF-42) : Remove Docsis Dependencies from GwProvApp for RaspberryPi Platform
    • 7666 (RDKCMF-6316) : To add README.md and doxygen comments in ccsp WebUI component
    • 8151 Remove unpinning override for WPE
    • 8145 (RDKBCMF-54) : hostapd is not starting in case of dual band and impacting LAN functionality once restarted in single as well as dual band.

Getting the code

$ mkdir rdkb
$ cd rdkb
$ repo init -u https://code.rdkcentral.com/r/manifests -m rdkb.xml -b rdkb-20170313
$ repo sync -j4 --no-clone-bundle
  • The -m rdkb.xml in the build sequence above is important. If this is not specified, you will get an RDK-V tree by default.
  • The -b rdkb-20170313 in the build sequence above specifies the branch to use. If you omit the -b rdkb-20170313 entirely, you will get the master (HEAD) of each component.
  • At any time, the community can build latest master by dropping the -b rdkb-20170313 option in the repo init command.
  • We have verified that this iteration boots to a login prompt and that you can log in, and that you can connect with a web browser to the web admin page.

Building the code

$ source meta-cmf-rdkb-bsp-emulator/setup-environment (select qemux86broadband)
$ bitbake rdk-generic-broadband-image

The image path will be: build-qemux86broadband/tmp/deploy/images/qemux86broadband/rdk-generic-broadband-image-qemux86broadband.vmdk

Building TDK

Follow the steps as for a normal build, above, but use the following bitbake command:

$ bitbake rdk-generic-broadband-tdk-image

The image path will be: build-qemux86broadband/tmp/deploy/images/qemux86broadband/rdk-generic-broadband-tdk-image-qemux86broadband.vmdk

TDK for RDK-B documentation is available: https://rdkwiki.com/rdk/display/TDK/TDK+Release+M45

Running the emulator

  1. Start VirtualBox.
  2. Click New -> Enter name -> Select type Linux -> Select version Other Linux (32 bit) -> Click Next
  3. Select Memory size - 512MB -> Click Next
  4. Select option Use an existing virtual hard drive -> Select the built image above -> Click Create
  5. Once the VM has been created, select the new image and click Settings -> Network -> Select Attached to: 'Bridged Adapter' -> Click Ok
  6. Click Start.This will bring up the emulator with the initial splash screen

Known Issues

  • RDK-B test results do not include the RDK-B TCL tests as they are not currently run.
  • TDK-312 RDK-B TCL test retrieves wrong IP
  • TDK-331 RDK-B SNMP-PA Test Failures snmp commands not found
  • No labels