RDK-B_2.1-20160815

Highlights since 2.1-20160808

• New components: None.
• Components updated:
  • CcspCommonLibrary, CcspCr, CcspLMLite, CcspPandM, CcspPsm, CcspSnmpPa, CcspWifiAgent, TestAndDiagnostic, Utopia, webui, rdk-oe.
• Patches updated: None.
• Community contributions: None.
• This is the first release with TDK test results.

Getting the code

$ mkdir rdkb
$ cd rdkb
$ repo init -u https://code.rdkcentral.com/r/manifests -m rdkb.xml -b rdkb-2.1-20160815
$ repo sync -j4 --no-clone-bundle

• The -m rdkb.xml in the build sequence above is important. If this is not specified, you will get an RDK-V tree by default.
• The -b rdkb-2.1-20160815 in the build sequence above specifies the branch to use. If you omit the -b rdkb-2.1-20160815 entirely, you will get the master (HEAD) of each component.
• At any time, the community can build latest master by dropping the -b rdkb-2.1-20160815 option in the repo init command.
• We have verified that this iteration boots to a login prompt and that you can log in, and that you can connect with a web browser to the web admin page, but that is the extent of the testing at this time.

Building the code

$ source meta-cmf-rdkb-bsp-emulator/setup-environment (select qemux86broadband)
$ bitbake rdk-generic-broadband-image

The image path will be: build-qemux86broadband/tmp/deploy/images/qemux86broadband/rdk-generic-broadband-image-qemux86broadband.vmdk

Building TDK

Follow the steps as for a normal build, above, but use the following bitbake command:

$ bitbake rdk-generic-broadband-tdk-image

The image path will be: build-qemux86broadband/tmp/deploy/images/qemux86broadband/rdk-generic-broadband-tdk-image-qemux86broadband.vmdk

TDK for RDK-B documentation is available: https://rdkwiki.com/rdk/display/TDK/TDK-B+Release+01

Running the emulator

1. Start VirtualBox.
2. Click New -> Enter name -> Select type Linux -> Select version Other Linux (32 bit) -> Click Next
3. Select Memory size - 512MB -> Click Next
4. Select option Use an existing virtual hard drive -> Select the built image above -> Click Create
5. Once the VM has been created, select the new image and click Settings -> Network -> Select Attached to: 'Bridged Adapter' -> Click Ok
6. Click Start.This will bring up the emulator with the initial splash screen

Known Issues

• TDK-285 Several TS_WIFIAGENT TDK tests fail due to "SET API Validation is Failure"

• TDK-286 All TS_COSAMTA TDK tests fail due to Python script NameError