This is the summary page that describes the CMF RDK-B iteration rdkb-20170130.

Below are links to the relevant documents for the release.

For the Gerrit links, you need to log in before you will be able to see the contents.

 

The latest RDK-B release addresses licensing issues so users are advised to move to the latest release.


Baseline

 

BaselineCMF-201701302017-01-30 baseline.
Post-baseline updates  
TDKM43

https://rdkwiki.com/rdk/display/TDK/TDK+Release+M43

Manifestrdkb-20170130 

Highlights since 20170116

  • New components: None.
  • Components updated:
    • CcspCommonLibrary, CcspLMLite, CcspMoCA, CcspMtaAgent, CcspPandM, CcspTr069Pa, CcspWifiAgent, TestAndDiagnostic, Utopia, hal, sysint, webui.
  • Patches updated: None.
  • Community contributions: 
    • 6528 RDKCOM-35 Enabling Lan/Wan connectivity for Raspberry Pi platform.

Getting the code

$ mkdir rdkb
$ cd rdkb
$ repo init -u https://code.rdkcentral.com/r/manifests -m rdkb.xml -b rdkb-20170130
$ repo sync -j4 --no-clone-bundle
  • The -m rdkb.xml in the build sequence above is important. If this is not specified, you will get an RDK-V tree by default.
  • The -b rdkb-20170130 in the build sequence above specifies the branch to use. If you omit the -b rdkb-20170130 entirely, you will get the master (HEAD) of each component.
  • At any time, the community can build latest master by dropping the -b rdkb-20170130 option in the repo init command.
  • We have verified that this iteration boots to a login prompt and that you can log in, and that you can connect with a web browser to the web admin page.

Building the code

$ source meta-cmf-rdkb-bsp-emulator/setup-environment (select qemux86broadband)
$ bitbake rdk-generic-broadband-image

The image path will be: build-qemux86broadband/tmp/deploy/images/qemux86broadband/rdk-generic-broadband-image-qemux86broadband.vmdk

Building TDK

Follow the steps as for a normal build, above, but use the following bitbake command:

$ bitbake rdk-generic-broadband-tdk-image

The image path will be: build-qemux86broadband/tmp/deploy/images/qemux86broadband/rdk-generic-broadband-tdk-image-qemux86broadband.vmdk

TDK for RDK-B documentation is available: https://rdkwiki.com/rdk/display/TDK/TDK+Release+M43

Running the emulator

  1. Start VirtualBox.
  2. Click New -> Enter name -> Select type Linux -> Select version Other Linux (32 bit) -> Click Next
  3. Select Memory size - 512MB -> Click Next
  4. Select option Use an existing virtual hard drive -> Select the built image above -> Click Create
  5. Once the VM has been created, select the new image and click Settings -> Network -> Select Attached to: 'Bridged Adapter' -> Click Ok
  6. Click Start.This will bring up the emulator with the initial splash screen

Known Issues

  • TDK-312 RDK-B TCL test retrieves wrong IP
  • TDK-309 RDK-B WIFI Agent Factory Reset test fails with no logged failures
  • TDK-313 RDK-B PAM tests fail after CcspPandMSsp process dies
  • No labels