CMF

RDK Releases

Documentation

CMF Videos

Support
Support for CMF is provided by the RDK Support group.

To contact RDK Support:
Enter a ticket: https://jira.rdkcentral.com/
or
E-mail: support@rdkcentral.com

Child pages
  • RDK-B_20170803
Skip to end of metadata
Go to start of metadata

This is the summary page that describes the CMF RDK-B iteration rdkb-20170803.

Below are links to the relevant documents for the release.

For the Gerrit links, you need to log in before you will be able to see the contents.

 

The latest RDK-B release addresses licensing issues so users are advised to move to the latest release.


Baseline

 

BaselineCMF-201708032017-08-03 baseline.
Post-baseline updates  
TDKM50

https://wiki.rdkcentral.com//display/TDK/TDK+Release+M50

Manifestrdkb-20170803 

Highlights since 20170626

  • New components: None.
  • Components updated:
    • crashupload, rdk_logger, CcspCMAgent, CcspCommonLibrary, CcspLMLite, CcspMisc, CcspMoCA, CcspPandM, CcspPsm, CcspSnmpPa, CcspTr069Pa, CcspWifiAgent, CcspXDNS, GwProvApp, GwProvApp-ePON, TestAndDiagnostic, Utopia, Xconf, hal, halinterface, hotspot, sysint, webui, rdkb/devices/raspberrypi/hal, rdkb/devices/rdkbemu/ccsp/rdkb, rdkbemu_xb3.
  • Patches updated:
    • patches/rdk-oe
  • Community contributions: 

Getting the code

$ mkdir rdkb
$ cd rdkb
$ repo init -u https://code.rdkcentral.com/r/manifests -m rdkb.xml -b rdkb-20170803
$ repo sync -j4 --no-clone-bundle
  • The -m rdkb.xml in the build sequence above is important. If this is not specified, you will get an RDK-V tree by default.
  • The -b rdkb-20170803 in the build sequence above specifies the branch to use. If you omit the -b rdkb-20170803 entirely, you will get the master (HEAD) of each component.
  • At any time, the community can build latest master by dropping the -b rdkb-20170803 option in the repo init command.
  • We have verified that this iteration boots to a login prompt and that you can log in, and that you can connect with a web browser to the web admin page.

Building the emulator

$ source meta-cmf-rdkb-bsp-emulator/setup-environment (select qemux86broadband)
$ bitbake rdk-generic-broadband-image

The image path will be: build-qemux86broadband/tmp/deploy/images/qemux86broadband/rdk-generic-broadband-image-qemux86broadband.vmdk

To build TDK, follow the steps as for a normal build, above, but use the following bitbake command:

$ bitbake rdk-generic-broadband-tdk-image

The image path will be: build-qemux86broadband/tmp/deploy/images/qemux86broadband/rdk-generic-broadband-tdk-image-qemux86broadband.vmdk

TDK for RDK-B documentation is available: https://wiki.rdkcentral.com//display/TDK/TDK+Release+M50

Running the emulator

  1. Start VirtualBox.
  2. Click New -> Enter name -> Select type Linux -> Select version Other Linux (32 bit) -> Click Next
  3. Select Memory size - 512MB -> Click Next
  4. Select option Use an existing virtual hard drive -> Select the built image above -> Click Create
  5. Once the VM has been created, select the new image and click Settings -> Network -> Select Attached to: 'Bridged Adapter' -> Click Ok
  6. Click Start.This will bring up the emulator with the initial splash screen

Building for RaspberryPi

$ mkdir <workspace dir>
$ cd <workspace dir>
$ repo init –u https://code.rdkcentral.com/r/manifests -m rdkb.xml –b rdkb-20170803-rpi
$ repo sync -j4 --no-clone-bundle
$ source meta-cmf-raspberrypi/setup-environment

Select option raspberrypi-rdk-broadband.conf

$ bitbake rdk-generic-broadband-image

Note. The kernel Image and root filesystem will be created under the ./tmp/deploy/images/raspberrypi-rdk-broadband folder

Documentation for RDK-B for RaspberryPi is available here: https://rdkwiki.com/rdk/display/DEVTOOLS/RDK+Broadband+%28RaspberryPi%29+-Krogoth

Running on the RaspberryPi

Known Issues

General:

  • TCL tests not run for RPI or Emulator, TCL scripts and script execution will be resumed once the scripts are stabilized

RPI Issues:

  • RPI-41 lighttpd process is not getting restarted automatically once the process is crashed/killed
  • RPI-54 In Connected Device page, Device Type is shown as Ethernet instead of WIFI when client is connected via WIFI
  • RPI-55 Management portal fails to load
  • RPI-57 OperationalDataTransmitRates and SupportedDataTransmitRates of WiFi 2.4 GHz returning empty values
  • RPI-58 The OperatingChannelBandwidth parameter of WiFi 2.4GHz returning empty value

Emulator TDK issues:

  • TDK-396 RDKB EMU Reboots During LMLite Tests
  • TDK-368 RDKB-EMU Intermittent Segfault in CcspWiFiAgent.service
    • observed intermittent segfault when running TS_WIFIAGENT_FactoryReset test on emulator, reboot resolves
  • TDK-395 RDKB EMU TS_SNMP_SetSSIDEnableWithRadioDisabled Fail
  • TDK-377 RDKB EMU TS_WIFIAGENT_5GHZ_AutoChannelEnable segfault in CcspWifiAgent service
  • TDK-372 RDKB EMU CMF RDK Logger Test Failures
  • TDK-375 RDKB EMU TS_TAD UDPEcho Test Failures
  • SSIDs of WiFi 2.4GHz and 5GHZ are retrieved as OutOfService (RDKBEMU-498)
  • Device.WiFi.AccessPoint AssociatedDeviceNumberOfEntries is not getting incremented when WIFI client is connected to the 2.4/5ghz SSID (RDKBEMU-509)
  • Set/Get of 2.4/5GHZ WIFI parameters works via dmcli/webui even without the WIFI dongle connected (RDKBEMU-484)
  • WIFI crashes after setting Device.WiFi.Radio.2.AutoChannelEnable as true and apply settings (RDKBEMU-510)
  • Device.Hosts.X_CISCO_COM_ConnectedDeviceNumber is not zero in Bridge mode (RDKBEMU_504)
  • LeaseTimeRemaining is not getting updated properly (RDKBEMU-505)
  • Unable to connected to changed wifi 5G ssid (RDKBEMU-500)
    • After changing SSID on emulator 5Ghz need to reboot for it to take effect
  • Not able to login to the Xfinity page. Throws error as "Can not get password for admin from backend" (RDKBEMU-508)
  • Parameters like BytesReceived, PacketsReceived are not getting populated after a successful UDP echo command executed (RDKBEMU-502)
  • Device.IP.Diagnostics.TraceRoute.ResponseTime not getting updated after a successful trace route (RDKBEMU-501)
  • Reset of WIFI is not happening through snmp (RDKBEMU-506)
  • Trying to edit the port triggering rule added throws error as "CCSP_ERR_INVALID_PARAMETER_VALUE" (RDKBEMU-507)
  • SNMP Query to get the System Description details is not returning the mandatory fields like HW_REV,SW_REV (RDKEMU-380)
  • Fails to set the value of Device.DNS.Diagnostics.NSLookupDiagnostics.DiagnosticsState as Requested if the DNSServer value as empty (RDKBEMU-503)

Generic TDK Issues:

  • TDK-394 RDKB Wifi SSID test scripts missing time import
  • Polling period not reverting back to default value after OverrideTTLseconds.(RDKB-12374)
  • Reporting period not reverting back to default value after OverrideTTLseconds. (RDKB-12555)
  • ApplySetting operation for enabling auto channel mode of WIFi 2.4GHz is going for timeout (RDKB-13184)
  • ApplySetting operation for enabling auto channel mode of WIFi 5GHz is going for timeout (RDKB-13169)
  • No labels