This is the summary page that describes the CMF RDK-B iteration rdkb-20171127.

Below are links to the relevant documents for the release.

For the Gerrit links, you need to log in before you will be able to see the contents.


The latest RDK-B iteration addresses licensing issues so users are advised to move to the latest iteration. 

Baseline 

BaselineCMF-201711272017-11-27 baseline.
Post-baseline updates

TDKM52

https://wiki.rdkcentral.com/display/TDK/TDK+Release+M52

Manifestrdkb-20171127

Highlights since 20171030

  • Components updated:
    • crashupload, rdk_logger, sys_resource, CcspCMAgent, CcspCommonLibrary, CcspDmCli, CcspLMLite, CcspMisc, CcspMoCA, CcspPandM, CcspPsm, CcspSnmpPa, CcspTr069Pa, CcspWifiAgent, PowerManager, TestAndDiagnostic, Utopia, Xconf, hal, halinterface, hotspot, sysint, webui, rdkb/devices/raspberrypi/hal, rdkb/devices/rdkbemu/ccsp/rdkb.
  • Community contributions: 

Getting the code

Note: The manifests repository is only available to RDK licensees.

$ mkdir rdkb
$ cd rdkb 
$ repo init -u https://code.rdkcentral.com/r/manifests -m rdkb.xml -b rdkb-20171127
$ repo sync -j4 --no-clone-bundle

  • The -m rdkb.xml in the build sequence above is important. If this is not specified, you will get an RDK-V tree by default.
  • The -b rdkb-20171127 in the build sequence above specifies the branch to use. If you omit the -b rdkb-20171127 entirely, you will get the master (HEAD) of each component.
  • At any time, the community can build latest master by dropping the -b rdkb-20171127 option in the repo init command.
  • We have verified that this iteration boots to a login prompt and that you can log in, and that you can connect with a web browser to the web admin page.

Building for the emulator

$ source meta-cmf-rdkb-bsp-emulator/setup-environment (select qemux86broadband)
$ bitbake rdk-generic-broadband-image

The image path will be: build-qemux86broadband/tmp/deploy/images/qemux86broadband/rdk-generic-broadband-image-qemux86broadband.vmdk

To build TDK, follow the steps as for a normal build, above, but use the following bitbake command:

$ bitbake rdk-generic-broadband-tdk-image

The image path will be: build-qemux86broadband/tmp/deploy/images/qemux86broadband/rdk-generic-broadband-tdk-image-qemux86broadband.vmdk

TDK documentation is available here: https://wiki.rdkcentral.com/display/TDK/TDK+Release+M52

Running the emulator

  1. Start VirtualBox.
  2. Click New -> Enter name -> Select type Linux -> Select version Other Linux (32 bit) -> Click Next
  3. Select Memory size - 512MB -> Click Next
  4. Select option Use an existing virtual hard drive -> Select the built image above -> Click Create
  5. Once the VM has been created, select the new image and click Settings -> Network -> Select Attached to: 'Bridged Adapter' -> Click Ok
  6. Click Start. This will bring up the emulator with the initial splash screen

Building for RaspberryPi

$ mkdir <workspace dir>
$ cd <workspace dir>
$ repo init –u https://code.rdkcentral.com/r/manifests -m rdkb.xml –b rdkb-20171127-rpi
$ repo sync -j4 --no-clone-bundle
$ source meta-cmf-raspberrypi/setup-environment

Select option raspberrypi-rdk-broadband.conf

$ bitbake rdk-generic-broadband-image

Note. The kernel Image and root filesystem will be created under the ./tmp/deploy/images/raspberrypi-rdk-broadband folder

Documentation for RDK-B for RaspberryPi is available here: https://wiki.rdkcentral.com/display/DEVTOOLS/RDK+Broadband+(RaspberryPi)+-Krogoth

Running on the RaspberryPi


Please see RDK Broadband (RaspberryPi) -Krogoth.

Known Issues

RPI Issues:

  • TDK-433 RDKB RPI TS_PAM_DeviceUsers_SetAdminPassword Failure
  • TDK-409 RDKB RPI TS_WIFIHAL_5GHzGetRadioStandard Failure
  • RPI-41 TDK SelfHeal lighttpd process is not getting restarted automatically once the process is crashed/killed
  • RPI-61 port triggering is not working for RaspberryPi device
  • RPI-63 LMLIte Connected devices are not displayed on management portal under connected device list
  • RPI-85 TDK WIFI Not able to change the operating standard value of 2.4GHZ
  • RPI-86 TDK WIFI Not able to change the operating standard value of 5GHZ
  • RPI-110 Verify Restore WiFi Setting on Rpi for Captive Portal
  • RPI-131 Cannot get admin password from backend.

Emulator Issues:

  • TDK-368 RDKB-EMU Intermittent Segfault in CcspWiFiAgent.service
  • TDK-375 RDKB EMU TS_TAD UDPEcho Test Failures
  • TDK-424 RDKB EMU TS_WIFIHAL Failures
  • TDK-425 RDKB EMU failure setting Device.X_RDKCENTRAL-COM_Report.NetworkDevicesStatus.ReportingPeriod
  • TDK-432 RDKB EMU WIFIHAL GetSSIDStatus Failures
  • RDKBEMU-380 TDK SNMP SNMP Query to get the System Description details is not returning the mandatory fields like HW_REV,SW_REV
  • RDKBEMU-393 RDKB Emulator When firewall config is set to high, low or medium, the traffic from wlan client to lan client is blocked
  • RDKBEMU-502 Parameters like BytesReceived, PacketsReceived are not getting populated after a successful UDP echo command executed
  • RDKBEMU-508 TDK WEBUI Not able to login to the Xfinity page. Throws error as "Can not get password for admin from backend"
  • RDKBEMU-517 TDK WIFI Not detecting WIFI with Tenda 300Mbps Dual Band Wireless N USB Adapter (W522U: Ralink driver
  • RDKBEMU-542 TDK WIFI No support for 80MHz OperatingChannelBandwidth in WIFI 5GHZ
  • RDKBEMU-543 TDK WIFI Negative Scenario Getting segmentation fault when we pass invalid reference or null pointers to exposed HAL APIs in WIFI
  • RDKBEMU-549 TDK WIFI HAL ChannelInUse Value for 5GHZ returned by HAL API wifi_getRadioChannelsInUse() and TR-181 parameter are different
  • RDKBEMU-566 RDKB Emulator for Developers builds are failing while configuring nfs-utils

Generic TDK Issues:

  • RDKB-9915 TDK Port Triggering Master CcspPandMSsp process crashes when trying to enable a rule added for port triggering
  • RDKB-10573 TDK WIFI Master WiFi agent crashes when trying to set values for MAC Filter table
  • RDKB-10750 TDK PAM Master Fails to set the value as "Requested" for Device.IP.Diagnostics.DownloadDiagnostics.DiagnosticsState
  • RDKB-10977 TDK TAD Master Fails to set the value as "Requested" for Device.DNS.Diagnostics.NSLookupDiagnostics.DiagnosticsState
  • RDKB-12488 TDK Logger RDKB does not support the option to override the debug.ini file location from the standard /etc path as supported in RDK-V
  • RDKB-14126 TDK Getting invalid parameter error on setting parameter values for a new PortMapping rule
  • No labels