RDKV Automatics XCONF Test Cases

Released XCONF Related Test Cases

SI No	Automation ID	Steps	Summary	Release
1	TC-XDCDL-1008	7	XCONF/CDL Test case to verify CDL status after reboot during CDL.	Release 9
2	TC-XDCDL-1002	7	Switching between Power-on/standby modes during XCONF/DIFD	Release 9
3	TC-XDCDL-1109	8	Switching between Power-on/standby modes during XCONF/DIFD	Release 9
4	TC-XDCDL-1009	3	Test to verify CDL rejection of same build when re-attempted.	Release 9
5	TC-FIRMWAREUPGRADEUI-1001	7	Test case to verify firmware upgrade through UI	Release 26
6	TC-XCONF-1001	5	Verifying image upgrade with same image available in the device	Release 29
7	TC-XCONF-1003	7	Verify the image upgrade for Release builds	Release 29
8	TC-NEGATIVECDL-1001	5	Verifying image upgrade with different model prefix shows error	Release 30
9	3DOT0_TC_RDKE-WEBPA-CDL	6	Verify CDL via WEBPA	Release 32
10	3DOT0_RDKE_STANDBY_XCDL	5	Verify XCONF/CDL in standby mode	Release 32
11	3DOTO-TC-CDL-INVALIDBUILD-1000	6	Test case to verify invalid build shows 404 response in logs	Release 32
12	3DOTO-TC-CDL-REBOOT-1000	5	Test case to verify image upgrade is triggered when reboot command is given	Release 32
13	3DOTO-TC-CDL-REBOOTIMMEDTRUE-1000	5	Test case to verify image upgrade is triggered and reboot is performed when reboot immediately is true	Release 32
14	3DOTO-TC-EXCLUDECDL-1000	6	Test case to verify image upgrade is excluded and excluded message shown in log when change is applied to rfc parameter	Release 32