...

         2. A new bridge is created lan0net0(interface link llan0lnet0) which will have 10.0.0.1 ip address

Image Added         Image Removed

         3. Private WiFi should stops broadcasting

         Image Removed

         4.Ethernet (lan) clients should get Public IP address(i,e in erouter ip series)

            Image Removed Image Added

        5. Verify whether the admin UI page is accessible by using 10.0.0.1 ip in ethernet client device 

               Image RemovedFacing issues with Admin Ui page for connected client device.
            Tracked under below jira.

        6. brlan0 shouldn't have  IP address

           Image RemovedImage Added

8.2. Bridge-Static → Router

1.  Changing the LanMode from bridge-static to Router Mode.

         Image RemovedImage Added

       2. lan0 net0 and llan0 lnet0 interfaces should be deleted

        Image Removed

        3.Private WiFi Should be broadcasted

         Image Removed

        4. WiFi and Lan connected clients should get IP address and internet access

          Image Removed

        5.Admin UI should be accessible via connected clients.

           Image Removed

        6.brlan0 should have IP address

Image Added

                      Image Removed  

Tested Image details,

Image RemovedImage Added

9. References

9.1. Ticket details

Image RemovedREFPLTB-2901 - Bridge-Mode functionality is not working properly after manual reboot Resolved

Image RemovedREFPLTB-2843 - RPI4 Kirkstone sanity in Bridge Mode - Failing Resolved

Image RemovedREFPLTB-2943

9.2. Code review links

https://code.rdkcentral.com/r/q/topic:%22RPI_BRIDGEMODE%22/c/rdkb/components/opensource/ccsp/Utopia/+/111599

https://github.com/rdkcentral/meta-cmf-bananapi/pull/68