Versions Compared

Old Version 32

changes.mady.by.user Keerthana Pandurangan

Saved on

compared with

New Version 33

changes.mady.by.user Keerthana Pandurangan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Code Block
    root@Docsis-Gateway:~# dmcli eRT getv Device.WiFi.AccessPoint.1.WPS.Enable
CR component name is: eRT.com.cisco.spvtg.ccsp.CR
subsystem_prefix eRT.
getv from/to component(eRT.com.cisco.spvtg.ccsp.wifi): Device.WiFi.AccessPoint.1.WPS.Enable
Execution succeed.
Parameter    1 name: Device.WiFi.AccessPoint.1.WPS.Enable
               type:       bool,    value: true
root@Docsis-Gateway:~# dmcli eRT getv Device.WiFi.AccessPoint.1.WPS.X_CISCO_COM_WpsPushButton
CR component name is: eRT.com.cisco.spvtg.ccsp.CR
subsystem_prefix eRT.
getv from/to component(eRT.com.cisco.spvtg.ccsp.wifi): Device.WiFi.AccessPoint.1.WPS.X_CISCO_COM_WpsPushButton
Execution succeed.
Parameter    1 name: Device.WiFi.AccessPoint.1.WPS.X_CISCO_COM_WpsPushButton
               type:        int,    value: 0
root@Docsis-Gateway:~# dmcli eRT setv Device.WiFi.AccessPoint.1.WPS.X_CISCO_COM_WpsPushButton int 1
CR component name is: eRT.com.cisco.spvtg.ccsp.CR
subsystem_prefix eRT.
setv from/to component(eRT.com.cisco.spvtg.ccsp.wifi): Device.WiFi.AccessPoint.1.WPS.X_CISCO_COM_WpsPushButton
Execution succeed.
root@Docsis-Gateway:~# dmcli eRT setv Device.WiFi.ApplyAccessPointSettings bool true
CR component name is: eRT.com.cisco.spvtg.ccsp.CR
subsystem_prefix eRT.
setv from/to component(eRT.com.cisco.spvtg.ccsp.wifi): Device.WiFi.ApplyAccessPointSettings
Execution succeed.
root@Docsis-Gateway:~# dmcli eRT getv Device.WiFi.AccessPoint.1.WPS.X_CISCO_COM_WpsPushButton
CR component name is: eRT.com.cisco.spvtg.ccsp.CR
subsystem_prefix eRT.
getv from/to component(eRT.com.cisco.spvtg.ccsp.wifi): Device.WiFi.AccessPoint.1.WPS.X_CISCO_COM_WpsPushButton
Execution succeed.
Parameter    1 name: Device.WiFi.AccessPoint.1.WPS.X_CISCO_COM_WpsPushButton
               type:        int,    value: 0


In BPI Target Board:
root@Filogic-GW:/lib/systemd/system# dmcli eRT setv Device.WiFi.AccessPoint.1.WPS.X_CISCO_COM_ActivatePushButton bool true
CR component name is: eRT.com.cisco.spvtg.ccsp.CR
subsystem_prefix eRT.
Execution succeed.

root@Filogic-GW:/lib/systemd/system# dmcli eRT setv Device.WiFi.AccessPoint.2.WPS.X_CISCO_COM_ActivatePushButton bool true
CR component name is: eRT.com.cisco.spvtg.ccsp.CR
subsystem_prefix eRT.
Execution succeed.


WPS Hardware Key Press in BPI

The Hardware key press is handled as a separate utility under broadband-utils repo:
https://github.com/rdkcentral/broadband-utils

In this implementation, Netlink sockets are handling the WPS Key press event (netlink-button-monitor.service) and further functionality is carried out by rbus API's which intimates OneWifi to carry out the WPS operation.
The recipe is present under:
meta-cmf-bananapi/meta-rdk-mtk-bpir4/recipes-common/rdk-wps-monitor/rdk-wps-monitor.bb

Test Results in BPI:

Image Modified


Image Modified

WPS Initiation:
1.Change the SSID of 2G and 5G from Web UI, to test WPS feature functionality.

Image Modified

2. Press the WPS PBC from BananaPi hardware. Try connecting 2G and 5G clients with new SSID without entering the password.

2G Client Connected (via Mobile):
Image Modified

5G Client connected (via Laptop):
Image Modified

3. Check the internet connectivity for both the clients.

NOTE:
6GHz is WPA3 personal-only. Does not support WPS!


UI validation:

By default WPS button is hidden.  For that , change the default security mode for 6g to enable the WPS button in WebUI.

...