Versions Compared

Old Version 36

changes.mady.by.user Shilpa S N

Saved on

compared with

New Version 37

changes.mady.by.user Shilpa S N

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

DAC application validation.

Testing with UspPa

  1. Verify the Device.SoftwareModules using below cmd
    2. dmcli eRT getv Device.SoftwareModules.
Code Block
root@Filogic-GW:

...

~/destination#  dmcli eRT getv Device.SoftwareModules.
CR component name is: eRT.com.cisco.spvtg.ccsp.CR
subsystem_prefix eRT.
Execution succeed.
Parameter    1 name: Device.SoftwareModules.ExecEnv.1.CurrentRunLevel
               type:        int,    value: 5 
Parameter    2 name: Device.SoftwareModules.ExecEnv.1.Enable
               type:       bool,    value: true 
Parameter    3 name: Device.SoftwareModules.ExecEnv.1.InitialRunLevel
               type:        int,    value: 5 
Parameter    4 name: Device.SoftwareModules.ExecEnv.1.Name
               type:     string,    value: default 
Parameter    5 name: Device.SoftwareModules.ExecEnv.1.Status
               type:     string,    value: Up 
Parameter    6 name: Device.SoftwareModules.ExecEnv.2.CurrentRunLevel
               type:        int,    value: 5 
Parameter    7 name: Device.SoftwareModules.ExecEnv.2.Enable
               type:       bool,    value: true 
Parameter    8 name: Device.SoftwareModules.ExecEnv.2.InitialRunLevel
               type:        int,    value: 5 
Parameter    9 name: Device.SoftwareModules.ExecEnv.2.Name
               type:     string,    value: test 
Parameter   10 name: Device.SoftwareModules.ExecEnv.2.Status
               type:     string,    value: Up 
Parameter   11 name: Device.SoftwareModules.ExecEnv.3.CurrentRunLevel
               type:        int,    value: 5 
Parameter   12 name: Device.SoftwareModules.ExecEnv.3.Enable
               type:       bool,    value: true 
Parameter   13 name: Device.SoftwareModules.ExecEnv.3.InitialRunLevel
               type:        int,    value: 5 
Parameter   14 name: Device.SoftwareModules.ExecEnv.3.Name
               type:     string,    value: user 
Parameter   15 name: Device.SoftwareModules.ExecEnv.3.Status
               type:     string,    value: Up

...

2. Bundle Installation - Host iperf bundle on local HTTP apache server and give the HTTP URL in the install command

...

Code Block
root@Filogic-GW:~# UspPa -c operate "Device.SoftwareModules.InstallDU(URL=http://192.168.29.199/dec9iperf3.tar.gz)"
Asynchronous Operation (Device.SoftwareModules.InstallDU()) Started successfully.
Device.LocalAgent.Request.1 created.
See log for output arguments of operation

...

Code Block
root@Filogic-GW:~# dmcli eRT getv Device.SoftwareModules.
CR component name is: eRT.com.cisco.spvtg.ccsp.CR
subsystem_prefix eRT.
Execution succeed.
Parameter    1 name: Device.SoftwareModules.DeploymentUnit.1.ExecutionEnvRef
               type:     string,    value: Device.SoftwareModules.ExecEnv.1 
Parameter    2 name: Device.SoftwareModules.DeploymentUnit.1.ExecutionUnitList
               type:     string,    value: Device.SoftwareModules.ExecutionUnit.1 
Parameter    3 name: Device.SoftwareModules.DeploymentUnit.1.Status
               type:     string,    value: Installed 
Parameter    4 name: Device.SoftwareModules.DeploymentUnit.1.URL
               type:     string,    value: http://192.168.29.199/dec9iperf3.tar.gz 
Parameter    5 name: Device.SoftwareModules.ExecEnv.1.CurrentRunLevel
               type:        int,    value: 5 
Parameter    6 name: Device.SoftwareModules.ExecEnv.1.Enable
               type:       bool,    value: true 
Parameter    7 name: Device.SoftwareModules.ExecEnv.1.InitialRunLevel
               type:        int,    value: 5 
Parameter    8 name: Device.SoftwareModules.ExecEnv.1.Name
               type:     string,    value: default 
Parameter    9 name: Device.SoftwareModules.ExecEnv.1.Status
               type:     string,    value: Up 
Parameter   10 name: Device.SoftwareModules.ExecEnv.2.CurrentRunLevel
               type:        int,    value: 5 
Parameter   11 name: Device.SoftwareModules.ExecEnv.2.Enable
               type:       bool,    value: true 
Parameter   12 name: Device.SoftwareModules.ExecEnv.2.InitialRunLevel
               type:        int,    value: 5 
Parameter   13 name: Device.SoftwareModules.ExecEnv.2.Name
               type:     string,    value: test 
Parameter   14 name: Device.SoftwareModules.ExecEnv.2.Status
               type:     string,    value: Up 
Parameter   15 name: Device.SoftwareModules.ExecEnv.3.CurrentRunLevel
               type:        int,    value: 5 
Parameter   16 name: Device.SoftwareModules.ExecEnv.3.Enable
               type:       bool,    value: true 
Parameter   17 name: Device.SoftwareModules.ExecEnv.3.InitialRunLevel
               type:        int,    value: 5 
Parameter   18 name: Device.SoftwareModules.ExecEnv.3.Name
               type:     string,    value: user 
Parameter   19 name: Device.SoftwareModules.ExecEnv.3.Status
               type:     string,    value: Up 
Parameter   20 name: Device.SoftwareModules.ExecutionUnit.1.Name
               type:     string,    value: Kn 
Parameter   21 name: Device.SoftwareModules.ExecutionUnit.1.Status
               type:     string,    value: Idle

4. Start iperf3 -s (server) on any Ubuntu PC and then Go to iperf bundle config.json file on BPi and give the iperf3 server IP.

...