Home
[RDK Central Wiki]
CMF
[Code Releases]
We use the branch rdkb-2022q1-dunfell.
After startup, eth1 is not up and only wlan0 in the bridge.
ifconfig
br0 Link encap:Ethernet HWaddr 5A:96:10:C3:97:84
inet addr:192.168.101.3 Bcast:192.168.101.255 Mask:255.255.255.0
inet6 addr: fe80::5896:10ff:fec3:9784/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:1404 (1.3 KiB)
br106 Link encap:Ethernet HWaddr 82:60:84:C9:39:2F
inet addr:192.168.106.1 Bcast:192.168.106.255 Mask:255.255.255.0
inet6 addr: fe80::8060:84ff:fec9:392f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:1404 (1.3 KiB)
br403 Link encap:Ethernet HWaddr 9A:C2:0E:69:66:AC
inet addr:192.168.245.1 Bcast:192.168.245.255 Mask:255.255.255.0
inet6 addr: fe80::98c2:eff:fe69:66ac/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:1404 (1.3 KiB)
brebhaul Link encap:Ethernet HWaddr 56:DD:05:21:B8:B3
inet addr:169.254.85.1 Bcast:169.254.85.255 Mask:255.255.255.0
inet6 addr: fe80::54dd:5ff:fe21:b8b3/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:1404 (1.3 KiB)
brlan0 Link encap:Ethernet HWaddr E4:5F:01:A7:3A:9A
inet addr:10.0.0.1 Bcast:10.0.0.255 Mask:255.255.255.0
inet6 addr: fe80::dc42:97ff:fe2a:9f62/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:114 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:12300 (12.0 KiB)
erouter0 Link encap:Ethernet HWaddr E4:5F:01:A7:3A:99
inet addr:192.168.18.10 Bcast:192.0.0.168 Mask:255.255.255.0
inet6 addr: fe80::e65f:1ff:fea7:3a99/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:12528 errors:0 dropped:5567 overruns:0 frame:0
TX packets:4667 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:5559041 (5.3 MiB) TX bytes:394748 (385.4 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:298932 errors:0 dropped:0 overruns:0 frame:0
TX packets:298932 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:15029408 (14.3 MiB) TX bytes:15029408 (14.3 MiB)
wlan0 Link encap:Ethernet HWaddr E4:5F:01:A7:3A:9A
inet6 addr: fe80::e65f:1ff:fea7:3a9a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:168 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:19856 (19.3 KiB)
root@RaspberryPi-Gateway:/usr/sbin# brctl show
bridge name bridge id STP enabled interfaces
br0 8000.000000000000 no
br106 8000.000000000000 no
br403 8000.000000000000 no
brebhaul 8000.000000000000 no
brlan0 8000.e45f01a73a9a no wlan0
But we can add eth1 to bridge manually.
The question is which module should be response to start the eth1 and add eth1 to brlan0?
What is the normal scenario?