Page History

...

1. 1. 1. Install the Raspian Pi OS from the “Raspberry Pi Imager” software. Select the Raspberry Pi Os (64-bit) image. 

      2. After installation below are additional packages to be installed for build, db and execution.

sudo apt-get update;
sudo apt-get upgrade;
sudo apt-get install vim;
sudo apt-get install libev-dev;
sudo apt-get install libjansson-dev;
sudo apt-get install zlib1g-dev;
sudo apt-get install libnl-3-dev;
sudo apt-get install libnl-genl-3-dev;
sudo apt-get install libnl-route-3-dev;
sudo apt-get install libavro-dev;
sudo apt-get install libcjson1 libcjson-dev;
sudo apt-get install libssl-dev;
sudo apt-get install uuid-dev;
sudo apt-get install libmysqlcppconn-dev; 
sudo apt-get install libreadline-dev;
sudo apt-get install iptables;
sudo apt install mariadb-server;
sudo apt-get install libmariadb3;
sudo apt-get install libmariadb-dev;
sudo apt-get install golang;

Build Instructions

    1.  In a working directory git clone the OneWifi in generic folder and unified-wifi-mesh repository

...

cd OneWifi
make -f build/linux/rpi/makefile setup

    3.  Build the Onewifi with make command

make -f build/linux/rpi/makefile all

    4.   Build easymesh components in the unified-wifi-mesh folder

...

sudo ./onewifi_em_ctrl root@root

sudo ./onewifi_em_cli

Note: cli expects the path to the libemcli.so. Provide the appropriate path with the below steps

create libemcli.conf in /etc/ld.so.conf.d directory pointing to the location of libemcli.so

cd /etc/ld.so.conf.d
sudo vi libemcli.conf
In this file specify the full path where libemcli.so is built. (install/lib - do pwd and copy)

Return back to install/bin path and execute command "sudo ldconfig"

• • • • Device 2 (in case of remote agent) or Device 1 (in col-located agent) - Run OneWifi first in a separate window and then run easy mesh agent (in case of remote agent)

...