Page History

Table of Contents

Scope

Goal is to bringup Wi-Fi 7 on Banana Pi R4

...

• BSP migration
  • Manifest change
    • Update meta-filogic(4d1a2a549791f1d57c83d8be89927aed647b62ea) and meta-cmf-filogic(39973f0b37b6afef2be10640bedd9efb359530df) revision in below manifests 
      • https://code.rdkcentral.com/r/plugins/gitiles/manifests/+/refs/heads/kirkstone/rdkb-bpi-nosrc.xml
      • https://code.rdkcentral.com/r/plugins/gitiles/manifests/+/refs/heads/kirkstone/rdkb-bpi-extsrc.xml

  • Things to consider 

    • Port all configurations introduced in meta-cmf-broadband and meta-cmf-bananapi
• Hostap 2.11 upstep
  • get meta-rdk-broadband changes from beta release & enable 2.11 distro in distro.conf
• Wi-Fi 7 Testing 
  • Enable 80211BE_CONFIG
  • NEW_PLATFORM

    NEWPLATFORM_PORT

• Unit testing 

Mediatek MP release

...

AX support for 2.4Ghz radio

• dmcli eRT setv Device.WiFi.2G80211axEnable bool true

RFC for WPA3 Transition

• dmcli eRT setv Device.DeviceInfo.X_RDKCENTRAL-COM_RFC.Feature.WPA3_Personal_Transition.Enable bool true

Dual band Testing (with g,n for 2.4 and a,n,ac for 5Ghz)

• SSID	radio status	Phy status	captive portal	Operating Mode	Security Mode	Client connectivity status	Internet browsing	DataModel Set/Get for Operating Mode and security mode	Build steps
  2.4 Ghz	ifconfig	iw dev		g,n	WPA2-Personal			dmcli get/set
  5Ghz				a,n,ac	WPA2-Personal

...

• SSID	radio status	Phy status	captive portal	Operating Mode	Security Mode	Client connectivity status	Internet browsing	DataModel Set/Get for Operating Mode and security mode	Build steps
  2.4 Ghz	ifconfig	iw dev		g,n,ax	WPA2-Personal (or) WPA3-Personal-Transition			dmcli get/set
  5Ghz				a,n,ac,ax	WPA2-Personal (or) WPA3-Personal-Transition
  6 Ghz				ax	WPA3-Personal

Triband Wi-Fi 7 testing(g,n,ax,be for 2.4Ghz and a,n,ac,ax,be for 5Ghz and ax,be for 6Ghz)

• SSID	radio status	Phy status	captive portal	Operating Mode	Security Mode	Client connectivity status	Internet browsing	DataModel Set/Get for Operating Mode and security mode	Build steps
  2.4 Ghz	ifconfig	iw dev		g,n,ax,be	WPA3-Personal-Transition			dmcli get/set
  5Ghz				a,n,ac,ax,be	WPA3-Personal-Transition
  6 Ghz				ax,be	WPA3-Personal

Definitions

1. WPA3-Personal-Transition = WPA3-Personal or WPA2-Personal