RDK Releases


CMF Videos

Support for CMF is provided by the RDK Support group.

To contact RDK Support:
Enter a ticket:

Child pages
  • RDK-B_20170213

Skip to end of metadata
Go to start of metadata

This is the summary page that describes the CMF RDK-B iteration rdkb-20170213.

Below are links to the relevant documents for the release.

For the Gerrit links, you need to log in before you will be able to see the contents.


The latest RDK-B release addresses licensing issues so users are advised to move to the latest release.



BaselineCMF-201702132017-02-13 baseline.
Post-baseline updates  


Highlights since 20170130

  • New components: None.
  • Components updated:
    • CcspCommonLibrary, CcspLMLite, CcspMisc, CcspMoCA, CcspPandM, CcspPsm, CcspTr069Pa, CcspWifiAgent, TestAndDiagnostic, Utopia, hal, halinterface, hotspot, sysint, webui, rdkb/devices/raspberrypi/hal, rdkb/devices/rdkbemu/ccsp/rdkb.
  • Patches updated: None.
  • Community contributions: 
    • 7841 RDKCOM-33 Add support for RDKB RaspberryPi Platform
    • 6642 (RDKCMF-5303) Add ccsp_common to LDFLAGS, in order to support breakpad
    • 6671 RDKCOM-41 Fix a compilation issue
    • 6639 RDKCOM-37 Fix initialization from incompatible pointer type error
    • 7519 (RDKBCMF-40) Wifi Hal changes for Channel and Encryption mode
    • 7516 (RDKBCMF-39) Country code is not getting set at boot time for 5Gz in case of dual band on RaspberryPi Platform.

Getting the code

$ mkdir rdkb
$ cd rdkb
$ repo init -u -m rdkb.xml -b rdkb-20170213
$ repo sync -j4 --no-clone-bundle
  • The -m rdkb.xml in the build sequence above is important. If this is not specified, you will get an RDK-V tree by default.
  • The -b rdkb-20170213 in the build sequence above specifies the branch to use. If you omit the -b rdkb-20170213 entirely, you will get the master (HEAD) of each component.
  • At any time, the community can build latest master by dropping the -b rdkb-20170213 option in the repo init command.
  • We have verified that this iteration boots to a login prompt and that you can log in, and that you can connect with a web browser to the web admin page.

Building the code

$ source meta-cmf-rdkb-bsp-emulator/setup-environment (select qemux86broadband)
$ bitbake rdk-generic-broadband-image

The image path will be: build-qemux86broadband/tmp/deploy/images/qemux86broadband/rdk-generic-broadband-image-qemux86broadband.vmdk

Building TDK

Follow the steps as for a normal build, above, but use the following bitbake command:

$ bitbake rdk-generic-broadband-tdk-image

The image path will be: build-qemux86broadband/tmp/deploy/images/qemux86broadband/rdk-generic-broadband-tdk-image-qemux86broadband.vmdk

TDK for RDK-B documentation is available:

Running the emulator

  1. Start VirtualBox.
  2. Click New -> Enter name -> Select type Linux -> Select version Other Linux (32 bit) -> Click Next
  3. Select Memory size - 512MB -> Click Next
  4. Select option Use an existing virtual hard drive -> Select the built image above -> Click Create
  5. Once the VM has been created, select the new image and click Settings -> Network -> Select Attached to: 'Bridged Adapter' -> Click Ok
  6. Click Start.This will bring up the emulator with the initial splash screen

Known Issues

  • TDK-312 RDK-B TCL test retrieves wrong IP
  • TDK-313 RDK-B PAM tests fail after CcspPandMSsp process dies
  • TDK-324 RDK-B CCSPCOMMON_MBUS Emulator Tests Failing on TDKB.cfg Load Error
  • No labels