This is the summary page that describes the CMF RDK-B iteration rdkb-20170424.

Below are links to the relevant documents for the release.

For the Gerrit links, you need to log in before you will be able to see the contents.

 

The latest RDK-B release addresses licensing issues so users are advised to move to the latest release.


Baseline

 

BaselineCMF-201704242017-04-24 baseline.
Post-baseline updates  
TDKM46

https://wiki.rdkcentral.com//display/TDK/TDK+Release+M46

Manifestrdkb-20170424 

Highlights since 20170410

  • New components: None
  • Components updated:
    • CcspCommonLibrary, CcspDmCli, CcspHomeSecurity, CcspLMLite, CcspMoCA, CcspPandM, CcspPsm, CcspSnmpPa, CcspWifiAgent, FirmwareSanity, GwProvApp, TestAndDiagnostic, Utopia, sysint, webui, hal.
  • Patches updated: None.
  • Community contributions: 

Getting the code

$ mkdir rdkb
$ cd rdkb
$ repo init -u https://code.rdkcentral.com/r/manifests -m rdkb.xml -b rdkb-20170424
$ repo sync -j4 --no-clone-bundle
  • The -m rdkb.xml in the build sequence above is important. If this is not specified, you will get an RDK-V tree by default.
  • The -b rdkb-20170424 in the build sequence above specifies the branch to use. If you omit the -b rdkb-20170424 entirely, you will get the master (HEAD) of each component.
  • At any time, the community can build latest master by dropping the -b rdkb-20170424 option in the repo init command.
  • We have verified that this iteration boots to a login prompt and that you can log in, and that you can connect with a web browser to the web admin page.

Building the emulator

$ source meta-cmf-rdkb-bsp-emulator/setup-environment (select qemux86broadband)
$ bitbake rdk-generic-broadband-image

The image path will be: build-qemux86broadband/tmp/deploy/images/qemux86broadband/rdk-generic-broadband-image-qemux86broadband.vmdk

To build TDK, follow the steps as for a normal build, above, but use the following bitbake command:

$ bitbake rdk-generic-broadband-tdk-image

The image path will be: build-qemux86broadband/tmp/deploy/images/qemux86broadband/rdk-generic-broadband-tdk-image-qemux86broadband.vmdk

TDK for RDK-B documentation is available: https://wiki.rdkcentral.com//display/TDK/TDK+Release+M46

Running the emulator

  1. Start VirtualBox.
  2. Click New -> Enter name -> Select type Linux -> Select version Other Linux (32 bit) -> Click Next
  3. Select Memory size - 512MB -> Click Next
  4. Select option Use an existing virtual hard drive -> Select the built image above -> Click Create
  5. Once the VM has been created, select the new image and click Settings -> Network -> Select Attached to: 'Bridged Adapter' -> Click Ok
  6. Click Start.This will bring up the emulator with the initial splash screen

Building for RaspberryPi

$ mkdir <workspace dir>
$ cd <workspace dir>
$ repo init –u https://code.rdkcentral.com/r/manifests -m rdkb.xml –b rdkb-20170424-rpi
$ repo sync -j4 --no-clone-bundle
$ source meta-cmf-raspberrypi/setup-environment

Select option raspberrypi-rdk-broadband.conf

$ bitbake rdk-generic-broadband-image

Note. The kernel Image and root filesystem will be created under the ./tmp/deploy/images/raspberrypi-rdk-broadband folder

Documentation for RDK-B for RaspberryPi is available here: https://rdkwiki.com/rdk/display/DEVTOOLS/RDK+Broadband+%28RaspberryPi%29+-Krogoth

Running on the RaspberryPi

Known Issues

  • Not all supported TCL tests for emulator are run, those not yet proven in the CMF environment are marked as SKIPPED
  • No TCL tests for RPI are currently included in the CMF iteration test run
  • TDK-336 - Port forwarding and port triggering test cases in Advanced Config cause PAM process to crash
    • Due to this issue a set of the Advanced Config tests are marked as SKIPPED
    • RDKBEMU-389 raised on emulator
  • TDK-339 - RDK-B Emulator - Several PAM and other scripts failing during automated test run due to CcspPandMSsp not found
    • TS_PAM_GetUpTime_AfterReboot is SKIPPED in the release test run, as issue only occurred after reboot during this test, under investigation
  • TDK-341 - RDK-B Emulator TS_PAM_IpIfMaxMTUSize fails on CMF image
    • RDKBEMU-406 raised on emulator
  • TDK-342 - RDK-B Emulator SNMP Tests - No Such Instance currently exists at this OID
    • TS_SNMP_Get2.4SSIDWithDisabledXfinityWifi tests fails in automated run but passes in manual run under investigation
  • TDK-349 - Track failure of TS_COSAPAM_MlanHomeSecurityBridge
    • fails in automated run but passes in manual run under investigation
  • TDK-344 - RDK-B Emulator TS_TAD traceroute test failures on CMF image
    • TS_TAD_Traceroute test fail in CMF evironement due to some security restrictions with test setup
  • TDK-348 - TDK-B RPI RDK Logger Tests Failiing
  • TDK-347 - TDK-B RPI TS_PAM_GetCurrentLocalTime Fails
  • No labels