Hi all, we are trying to know what is the hardware required to run RDK-B. Could anybody help us filling this table? or pointing out where we could find the info?



CPURAMFlash
Min


Typical



What are the functions that the Min Hardware can support

What are the extra functions that the Typical Hardware can support?

Thanks!

Eduardo.

  • No labels

3 Comments

  1. Sujithra Doss

    Hi Eduardo,

    A Raspberry Pi 3B with the below configuration can be an ideal minimum requirement to support most of the functionalities for RDK-B.

    The configuration of RPi 3B is CPU: Quadcore 1.2 GHz Broadcom BCM2837 64bit with 1GB RAM.

    R-Pi 3B would be sufficient for the basic wireless functionality using 2.4GHz. In case of 5 GHz band support R-Pi 3B+ would be good (Note : R-Pi 3B+ doesn’t support simultaneous dual band operations).

    Flash: The minimum size is around 285 MB. Anything above this should work just fine for loading/storing the build.

    RAM: As far as the logs/database is concerned, anything around 16 MB should be sufficient.

    We will get back if there are any changes for a typical setup.


    Thanks,

    Sujithra.

    1. Eduardo Panciera

      Thanks!! I will try to build an image for rPI.

      Regards.

      Eduardo.

  2. Z-eric dowek

    Thankls for the information.


    Regards,


    Eric