• No labels

4 Comments

  1. Shantha Kumar

    Hi,

    Do we have any developer documentation on the integration of UspPa with RDK CCSP components ? We would like to understand how UspPa utilizes the Get Parameter and Set Parameter functions that are defined in the CCSP components ? 

    The only information we could get is https://github.com/rdkcentral/usp-pa-vendor-rdk . But it doesn't have much documentation about the code.  Any documentation / pointers on the integration of UspPa with RDK CCSP components will be much appreciated.

    Thanks

  2. sipra samantray

    Hi Shantha Kumar,

    In RDK-B, all Ccsp get/set operation happens using Ccsp wrapper defined in CcspCommonLibrary, which is linked to each component during build time from respective recipe file.

    All supported data model in UspPa (as defined by UspPa's config files), can be found at below location and UspPa can discover the RDK-B data model at bootup and regenerate the data model config files. The USP DM config file is mapped to actual supported RDK-B DM list. Please check all the file at below location.

    meta-rdk-broadband/recipes-rdkb/usp-pa/usp-pa/conf

  3. Tang Heming

    Hi sipra samantray  Narayanaswamy Ramaiyer 


    Do you know USP of RDKB support the Firmware Upgrade? Thank you!

    The Content of TR369

    Appendix II: Firmware Management of Devices with USP Agents

  4. Praveen V P

    Hi Tang Heming 

    We do not have the support yet, currently firmware upgrade through Xconf feature is available.

    https://wiki.rdkcentral.com/display/RDK/Feature+Validation+%3A+Xconf+Server#FeatureValidation:XconfServer-FirmwareUpgradationforRPIusingXconfServer

    Thanks, 
    Praveen

DISCLAIMER: Please note that the use of the RDK Wiki is subject to its Privacy Policy & Terms of Use. In addition, this Wiki may be accessed by all RDK licensees and their contractors.