Page History

...

Introduction

The EvoStream RDK Media Server Streamer is much more than a multi-format, multi-protocol server that delivers your media rich content across multiple screens and platforms. The RDK camera software runs on RPi-0 device. This page dedicated to bringing up and validation of EMS RMS functionality in R-Pi Zero. 

Required Equipment

• Raspberry Pi 0 Device
• SD Card
• Power Cable
• OTG Cable
• Standard USB keyboard
• Mini HDMI connector
• HDMI Cable
• Television set/monitor with HDMI input

System Setup

Please refer below link for RPI-0 Environment setup

EMS Flow - Environment Setup Diagram

Build Procedure

$ repo init -u "https://code.rdkcentral.com/r/rdkcmf/manifests" -m rdkc-nosrc.xml -b master

...

$ bitbake rdk-generic-camera-image

Image Flash Procedure

$ sudo dd if="Image Name" of="Device Name" bs=4M

...

sudo dd if=rdk-generic-camera-image_default_20200130060729.rootfs.rpi-sdimg of=/dev/sdb bs=4M

EMS Validation Procedure

STEP 1:

Add require SSID and PSK in /etc/wpa_supplicant.conf file in below format

...