Versions Compared

Old Version 6

changes.mady.by.user Rajkumar Narayanan

Saved on

compared with

New Version 7

changes.mady.by.user Rajkumar Narayanan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Children Display

Table of Contents

Introduction

This page dedicated to bringing up and validation of Continuous video recording functionality in R-Pi Zero. 

CVR uses Kinesis Video Streams and supporting 24/7 video recording support.Allows the feature of storing the recorded content locally or in any AWS server.

Required Equipment

  • Raspberry Pi 0 Device
  • SD Card
  • Power Cable
  • OTG Cable
  • Standard USB keyboard
  • Mini HDMI connector
  • HDMI Cable
  • Television set/monitor with HDMI input

System Setup


Please refer below link for RPI-0 Environment setup

RDK-C Environment Setup

Yocto Build Steps

Code Block
languagebash
titleBuild steps
$ repo init -u "https://code.rdkcentral.com/r/rdkcmf/manifests" -m rdkc-nosrc.xml -b master
$ repo sync
$ source meta-cmf-raspberrypi/setup-environment
	select meta-cmf-raspberrypi/conf/machine/raspberrypi0-rdk-camera.conf
$ bitbake rdk-generic-camera-image

Image Flash Procedure

Code Block
languagebash
titleImage Flash step
$ sudo dd if="Image Name" of="Device Name" bs=4M

Example:
sudo dd if=rdk-generic-camera-image_default_20200130060729.rootfs.rpi-sdimg of=/dev/sdb bs=4M

AWS Account creation steps

STEP 1:

Can't able to validate without AWS account. so,Refer below link to create AWS account.

...

Code Block
languagebash
titleVideo Stream creation step
1.Sign in to the AWS Management Console and open the Kinesis console at https://eu-west-1.console.aws.amazon.com/kinesisvideo/home?region=eu-west-1#/.
2.On the Video streams page, choose Create video stream.
3.On the Create a new video stream page, type ExampleStream for the stream name. Leave the Default configuration radio button selected.
4.Choose Create video stream.
5.After Kinesis Video Streams creates the stream, review the details on the ExampleStream page.

CVR Validation Procedure

STEP 1:

Add require SSID and PSK in /etc/wpa_supplicant.conf file in below format

...