Page History

...

Introduction

The Firmware upgrade will upgrade higher or lower version of the current image in RPI target with the help of Xconf server and Local TFTP server.

RDK Media Streamer is much more than a multi-format, multi-protocol server that delivers your media rich content across multiple screens and platforms. The RDK camera software runs on RPi-0 device. This page dedicated to bringing up and validation of RMS functionality Firmware upgrade in R-Pi Zero. 

Required Equipment

• Raspberry Pi 0 Device
• SD Card
• Power Cable
• OTG Cable
• Standard USB keyboard
• Mini HDMI connector
• HDMI Cable
• Television set/monitor with HDMI input

System Setup

Please refer Refer below link for RPI-0 Environment setup

RDK-C Environment Setup

...

Environment Setup

...

Image Removed

Yocto Build Steps

...

Refer below link to build camera image

RDK-C Build Instructions for R-Pi

...

Image Flash Procedure

$ sudo dd if="Image Name" of="Device Name" bs=4M

Example:
sudo dd if=rdk-generic-camera-image_default_20200130060729.rootfs.rpi-sdimg of=/dev/sdb bs=4M

RMS Validation Procedure

STEP 1:

...