RDK Resources
[*RDK Preferred*]
Code Management Facility
RDK Forums
[RDK Conferences]
RDK Support
Archives
Papers & Presentations Archive
...
1. i) Login to Xconf server and go to "Common" → "Models"
ii) Add a unique name (Id) for your device and provide a description.
iii) Add the same "model name" in "/etc/device.properties" in the device.
2. Login Login to Xconf Server and go to DCM menu item and click on “Formulas” sub menu
23. Click on Create button
34. i) Provide a unique “Name”, along with “Description”, and build conditions and save the formula.
ii) Verify Percentage and Priority field(normally it displays the sequence number of formula, can be changed to make the formula higher/lower priority) is auto field up with their respective values
iii) Go to “Build condition” section and click on the first empty field to get all the available field displayed there
iv) Select estbMacAddress and provide the MAC address of Rpi board.
v) Add an "AND" operator and click on the first empty field
vi) Select "model" and provide the unique "Model name" used in step 1 above.
45. Verify the created formula (ex. RPI_formula22Aug) displayed in the formula list.
56. Click on Edit formula for the created formula (ex. RPI_formula_22Aug).
67. Edit formula page opens.
78. Click on “Create Device Settings” and fill up the fields as displayed in the screen below and click on save button:
89. Click on DCM menu then “Upload repository” submenu and click on “Create” button
910. Provide inputs as mentioned below screen and save the upload repository.
1011. Click on Formula and go back to the Edit formula page of the created formula (ex. RPI_formula_22Aug) and click on “Create Log Upload settings” button. Upload repository drop down menu field will show all the upload repositories including the created one (ex. Chennai_22Aug_repo)
1112. Provide inputs as mentioned in the screen below:
1213. Save the “Edit Formula” page
1314. Verify the Formula page for the created formula (ex. RPI_formula_22Aug) where View Settings column displays the “Device” and “LogUpload”
1415. Go to Telemetry menu and click on “Permanent Profile”
1516. Click on “Create” button to create permanent profile with different markers.
...
Header | Content | Type |
Firewall | starting firewall service | FirewallDebug.txt |
Firewall-1 | Inside firewall service_init() | FirewallDebug.txt |
Wi-Fi | Wifi Agent loaded successfully... | WiFilog.txt.0 |
Armconsole | get_PartnerID - Failed Get factoryPartnerId | ArmConsolelog.txt.0 |
swupdate | image itself not downloaded from TFTP, | swupdate.log |
1617. Save Permanent profile (ex. Perm_Prof_22Aug) and it will display in the Permanent profiles page
1718. Click on “Telemetry” and then click on “Targeting Rules”
1819. Click on “Create” button, provide Rule name and select different rule parameters and map the Permanent profile with this rule by selecting “Bound profile” drop down menu. Save the Targeting rule.
1920. Verify the created Targeting rule displayed on the Targeting rule page
...