Page History

...

1. Pre-deployed url is available at http://35.154.217.235:8081/
2. Navigate to  Controller UI ( Controller UI can be loaded with the RPi / box's IP address with port number 9998 (http://<Rpi's /Box's IP address>:9998). )
3. Navigate to Resident App tab
4. Enter deployed url (http://35.154.217.235:8081/) in custom URL field and click ‘SET’.
5. The accelerator UI will get loaded on Resident App (web kit browser instance)

...

Press ‘Enter’ key on ‘Wifi’ to go to submenu related to Wifi settings. A screen appear from the right side and Wifi scan starts automatically. (On power on, make sure that box/RPI is not connected to Ethernet). On completion of scan, a list of available networks (access points) will be visible and if no networks were found, user can try again by using the "Discover WiFi" button on screen. On  

Image Added

On choosing a network, it will be directed to a screen with "Connect" and "OK" options. Selecting the "OK" option takes the control back to the previous screen

Image Added

For an open network, the "Connect" option connects to the network. For a secure network, user will be prompted for the password. A numerical keyboard is implemented for this purpose. A "Done" button lets user submit the password and connect to the network and if the password is wrong, a text is provided to let the user know of the same

Image Added

On successful connection, it is returned back to the previous screen with the list of available networks and user can see that the device has been connected to the desired network. On choosing the connected network from the list again, user shall be able to view the details of this network such as ssid, bssid, rate, noise, security, signal strength and frequency. It also gives the option to disconnect from this network and on disconnect a new scan starts automatically

Image Added

Volume Control

(The above figure shows volume control UI )

...

1. App gets stuck randomly if we launch metro apps back to back

2. Mute UI works, but mute functionality not working (Observed displaySettings plugin RPC call is also not working)

3. Bluetooth paired devices gets removed from the app after a long time(Observed only in Commscope)

4. Only numeric keyboard is available in Wifi Settings now. User won't be able to enter passwords with alphabets

5. Accelerator App crash observed on launching the app in Commscope box(Not observed in RPi and Realtek devices). App crash issue observed for other app URL also (https://jira.rdkcentral.com/jira/browse/VIP7802-159)

...