...

TR-069 is a technical specification that defines an application layer protocol for remote management of end-user devices. It was published by the Broadband Forum and was entitled CPE WAN Management Protocol (CWMP). It provides the communication between CPE and Auto Configuration Servers (ACS). An ACS can manage a device, trouble shoot, configure, upgrade etc. TR-69 uses common web protocols such as HTTP, TCP-IP, SOAP, XML-RPCs to exchange information.

...

GenieACS Server and Client Rpi communication

The CPE is responsible for establishing the session to the server. The CPE keeps sending HTTP POST requests during the session. The session is closed as soon as both CPE &

...

GenieACS  have indicated that they have nothing more to send (response or new RPC)

GenieACS Server 

Ensure the GenieACS Server Setup is launched and running to establish the Client-Server communication
GenieACS server home page:

...

1. Flash the RDK-Broadband image where the Tr069 Protocol Agent is enabled
   
   
2. Check for the Tr069Pa is active
   
   
   
   

3. Then, set the parameters,

   Code Block
   language bash theme DJango
   $ dmcli eRT setv Device.ManagementServer.EnableCWMP bool true $ dmcli eRT setv Device.ManagementServer.URL string http://172.20.10.115:7547/ $  dmcli eRT setv Device.DeviceInfo.X_RDKCENTRAL-COM_Syndication.TR69CertLocation string "/etc/cacert.pem"

   
   Following are the parameters needed to be checked for TR69

   Parameter Name	Expected Value
   Device.ManagementServer.EnableCWMP	true
   Device.ManagementServer.URL	ACS Server URL:  http://172.20.10.115:7547/
   Device.DeviceInfo.X_RDKCENTRAL-COM_Syndication.TR69CertLocation	/etc/cacert.pem

   Now, from the GenieACS Server try to fetch the Connected Devices details

...