RDK Resources
[*RDK Preferred*]
Code Management Facility
RDK Forums
[RDK Conferences]
RDK Support
Archives
Papers & Presentations Archive
...
NOTE:
shared links and information on taking serial connection and flashing OpenWRT imageIn serial console, press "Enter" key to get into u-boot prompt
Type "version" u-boot command to check the u-boot version
If the version found to be "U-Boot 2015.10-rc2", then type "reset" u-boot command. Then skip this section and move on to sub section(Setting default U-boot environment)
If version is other than U-Boot 2015.10-rc2, follow below steps (derived from https://wiki.debian.org/InstallingDebianOn/TurrisOmnia#Bootloader_update)
View file | ||||
---|---|---|---|---|
|
...
Code Block | ||
---|---|---|
| ||
dhcp
tftpboot 0x1000000 uboot-turris-omnia-spl.kwb
sf probe
sf update 0x1000000 0 $filesize |
...