Page History

...

1.  Firmware config can be created via Firmware - > Firmware Configs -> Create.  Enter Enter a description for this config.  It will be used in the rule. Here Also we can define the file name and version of the image/firmware that need to be downloaded to the CPE device. The models that we defined in Common → Models section will be available here, We can select the needed required models by clicking on it.

...

2.  To create a firmware template, go to Firmware → Firmware templates. Enter the ID name. Select priority from the 'Priority' drop down menu. Add conditions. If There are some already existing templates, if you are using the existing Firmware Templates for configuration ,you can skip this step.

...

3.  Firmware rule can be create via Firmware -> Firmware rules -> CreateRule Action -> Create. On clicking on Create button, a list of templates will be presented. We can select the required template (There will be default templates like ENV_MODEL_RULE, IP_RULE, MAC_RULE etc. and also the custom templates created from Firmware->Firmware template -> Create).

After we select the required template, 'Add firmware Rule' page will be displayed. Here the build conditions will be present from the 'template' that we added and in addition to that we can add additional Build Conditions also. To add firmware config , go to the 'Actions' tab and select the firmware config from 'Firmware config' drop down list (Select the firmware config that you have created).

Panel

4. The download location needs to be specified so that it can be returned in the response. Choose Firmware -> Download location filter-> Edit, where we can specify the location from where we can download the firmware. Enter the FQDN and Full http location for the firmware download server . For TFTP , we can enter the IP address and percentage. For where TFTP applies, a device will get back one of the locations below based on the percent listed for the locationHttp location will be returned by default to all devices.

Panel
title Site Navigation: http://<XCONF_SERVER>:19093 >> Firmware >> Download Location Round Robin Filter

...