Page History

Host Setup

The OpenEmbedded build system should be able to run on Ubuntu 18.04 distribution/other compatible linux distribution with the following versions for Git, tar, and Python.

• Git 1.8.3.1 or greater
• tar 1.27 or greater
• Python 3.4.0 or greater
• Coreutils(E.g realpath)

Note: You should also have about 50 Gbytes of free disk space for building images.

The essential packages you need for a supported Ubuntu or Debian distribution are shown in the following command:

$ sudo apt-get install gawk wget git-core diffstat unzip texinfo gcc-multilib \
  build-essential chrpath socat cpio python python3 python3-pip python3-pexpect \
  xz-utils debianutils iputils-ping python3-git python3-jinja2 libegl1-mesa libsdl1.2-dev \
  pylint3 xterm bmap-tools

$ sudo apt-get install git cmake autoconf texinfo openjdk-8-jdk openjdk-8-jre \
  m4 libtool libtool-bin curl pkg-config lib32z1 doxygen

Repo Setup

In order to use Yocto build system, the repo tool must be properly installed on the machine.

To install Repo make sure you have a /bin directory in your home directory and that it is included in your path

$ mkdir ~/bin
$ PATH=~/bin:$PATH
Download the repo tool and ensure that it is executable
$ curl http://commondatastorage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
$ chmod a+x ~/bin/repo

Note: it is also recommended to put credentials in ~/.netrc when interacting with repo.

A sample ~/.netrc file is illustrated below

machine code.rdkcentral.com login YOUR_USERNAME password YOUR_PASSWORD

Yocto Build Steps

To build, follow below instructions

Please append the below lines in setup-environment file in your local workspace,

$ mkdir <workspace dir>
$ cd <workspace dir>
$ repo init -u https://code.rdkcentral.com/r/reference/manifests -m rpi-tags/rpi3_rdkb_dunfell_30June2022.xml -b master
$ repo sync -j`nproc` --no-clone-bundle

$ MACHINE=raspberrypi-rdk-broadband source meta-cmf-raspberrypi/setup-environment 
$ bitbake rdk-generic-broadband-image

Flashing Procedure

Following command can be used to flash the RPI image to sd card using linux machine . bmap tool should be available in linux

bzip2 -d <path to ImageName.wic.bz2>
sudo -E bmaptool copy --nobmap <path to ImageName.wic> <path to SD card space>

Example:

$ bzip2 -d rdk-generic-broadband-image-raspberrypi-rdk-broadband.wic.bz2
$ sudo -E bmaptool copy --nobmap rdk-generic-broadband-image-raspberrypi-rdk-broadband.wic /dev/sdb

Validated Functionalities

No	Feature	Supported
1	LAN Connected Devices-Ethernet
2	WAN Connected Devices-Wi-Fi
3	Parental Control
4	Firewall settings
5	Advanced Config: Port Triggering
6	Advanced Config: Port Forwarding
7	Advanced Config: Remote Management
8	Advanced Config: DMZ
9	Xfinity Wi-Fi 2.4/5 GHz – Public Hotspot
10	Test and Diagnostics
11	Local WebUI Configuration
12	Factory Reset
13	DHCP /Reserved IP
14	EthWan
15	Eth Agent
16	2.4 GHz Band Support
17	5 GHz Band Support
18	Bridge Mode Support
19	Persistent Storage Management
20	WebPA for Comcast,community
21	Lost and Found
22	Bluetooth
22	Harvester Support
23	TR-69
24	SNMP
27	Boot time data measurement
28	Wireless Protection Setup(WPS)
29	Captive Portal
30	Wi-Fi MAC Filtering
31	Log Rotation Support
32	Firmware Upgrade Support
33	Multiboot Support
34	Telemetry Support
35	IPV6
36	Log level control through CcspLogAgent
37	Band Steering using RSSI
38	Backup and Restore
39	SelfHeal
40	Password-Reset
41	WebUI JST
42	Telemetry 2
43	RdkWanManager
44	RdkFwUpgradeManager