Versions Compared

Old Version 42

changes.mady.by.user Sruthi Santhosh

Saved on

compared with

New Version 43

changes.mady.by.user Sruthi Santhosh

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

3.0 Testcases Property Configuration


NoDescriptionConfiguration3.0 Test caseRemarks
1property to get default value of Device.WiFi.SSID.11.SSIDdefault.value.ssid.11.ssid3DOT0-TC-RDKB-DEFAULT-VALUES-1002Value should be the SSID value of Device.WiFi.SSID.11.SSID
2property to get default value of Device.WiFi.SSID.12.SSIDdefault.value.ssid.12.ssidValue should be the SSID value of Device.WiFi.SSID.12.SSID
3property to get the value of erouter0 IPv6 Global Addressdhcpv6.wan.ipv63DOT0-TC-RDKB-DHCP_CONFIG-1001

Value should be erouter0 IPv6 global address

Used for validation of TR181 parameter Device.DeviceInfo.X_COMCAST-COM_WAN_IPv6

4property to get the value of IPv6 Preferred Lifetimedhcpv6.ipv6.PreferredLifetimeIPv6 PreferredLifetime parameter value is same from DHCPv6 server
Used for validation of TR181 parameter Device.IP.Interface.1.IPv6Prefix.1.X_CISCO_COM_PreferredLifetime
5property to get the value of IPv6 Valid Lifetimedhcpv6.ipv6.ValidLifetimeIPv6 ValidLifetime parameter value is same from DHCPv6 server
Used for validation of TR181 parameter Device.IP.Interface.1.IPv6Prefix.1.X_CISCO_COM_ValidLifetime
6property to get the value of Device.DeviceInfo.X_RDKCENTRAL-COM_AdvancedSecurity.SafeBrowsing.Endpointsafebrowsing.endpoint.url3DOT0-TC-RDKB-SAFEBROWSING-1002



value of Device.DeviceInfo.X_RDKCENTRAL-COM_AdvancedSecurity.SafeBrowsing.Endpoint . 
7property to get the value of Device.DeviceInfo.X_RDKCENTRAL-COM_AdvancedSecurity.SafeBrowsing.Blockpagesafebrowsing.blockpage.urlvalue of Device.DeviceInfo.X_RDKCENTRAL-COM_AdvancedSecurity.SafeBrowsing.Blockpage
8property to get the value of Device.DeviceInfo.X_RDKCENTRAL-COM_AdvancedSecurity.SafeBrowsing.Warnpagesafebrowsing.warnpage.urlvalue of  Device.DeviceInfo.X_RDKCENTRAL-COM_AdvancedSecurity.SafeBrowsing.Warnpage
9property to get the value of Device.DeviceInfo.X_RDKCENTRAL-COM_AdvancedSecurity.SafeBrowsing.Cacheurlsafebrowsing.cacheurl.urlvalue of Device.DeviceInfo.X_RDKCENTRAL-COM_AdvancedSecurity.SafeBrowsing.Cacheurl
10property to get the value of Device.DeviceInfo.X_RDKCENTRAL-COM_AdvancedSecurity.SafeBrowsing.OtmDedupFqdnsafebrowsing.otmdedupfqdnvalue of  Device.DeviceInfo.X_RDKCENTRAL-COM_AdvancedSecurity.SafeBrowsing.OtmDedupFqdn 
11property to get the value of Telemetry config urltelemetry.config.url

3DOT0-TC-RDKB-WEBPA_SIZE_CCSP_BUS-1011

3DOT0-TC-RDKB-WEBPA_SIZE_RBUS-1012

3DOT0-TC-RDKB-WEBPA-1010

3DOT0-TC-RDKB-MTLS-1005

3DOT0-TC-RDKB-MTLS-1006

Value of Telemetry configuration url

12property to get the value T2 report profiles above 200kbtelemetry.t2.reportProfiles.above.200kbValue of Telemetry 2.0 Report profile above 200kb
13property to get the value T2 report profiles under 200kbtelemetry.t2.reportProfiles.200kbValue of Telemetry 2.0 Report profile under 200kb
14property to get the value of FirmwareDownloadURL above 4k sizefirmware.cdl.url.above.4kbValue of Firmware Download Location URL above 4k size
15property to get the value of Firmware Download Location URL below 4k sizecdl.rdkb.dac15.urlValue of Firmware Download Location URL below 4k size
16property to get the value of telemetry cert file telemetry.cert3DOT0-TC-RDKB-LONG_TERM_CERTS-1001value of telemetry cert file "dcm-cpe-xxxx.xxxx.xxxx.cert.pem"
17property to get the search value of Telemetry_TLSTelemetry_TLS.searchvaluesearch the value of Telemetry_TLS
18property to get the telemetry URLtelemetry.url value of telemetry url "https://xxxx.xxxx.xxxx/secure"
19property to get the log upload file name logupload.filename

value of Logupload filename

example : "1077B1A43D6D_Logs_04-22-21-11-39PM.tgz"

20property to get the log upload urllogupload.urlvalue of Logupload url "https://xxxxx.xxx.xxxx/S3.cgi"
21property to get the bluetooth tile reporting URLble.tile.reporting.url3DOT0-TC-RDKB-BLEADV-1001BLE Tile Reporting URL
22property to get Telemetry report url within double quotestelemetry.report.url.rfc.payload

3DOT0-TC-RDKB-MTLS-1005

3DOT0-TC-RDKB-MTLS-1006

value of Telemetry report url within double quotes
23property to set the payload for enabling meshdfsrfc.enable.meshdfs3DOT0-TC-RDKB-MESH-DFS-1001value of enable meshdfs feature payload via rfc given as json format
24property to set the payload for disabling meshdfsrfc.disable.meshdfs3DOT0-TC-RDKB-MESH-DFS-1001value of disable meshdfs feature payload via rfc given as json format
25property to set the value T2 report profile 1rbuscli.setvalue.t2reportprofile_13DOT0-TC-RDKB-TELEMETRY-1027
3DOT0-TC-RDKB-TELEMETRY-RBUS-1001

Value of Telemetry 2.0 Report profile 1 using rbuscli command, value given as json format

Eg: rbuscli setvalues Device.X_RDKCENTRAL-COM_T2.ReportProfiles string <value>

26property to set the value of T2 msgpackrbuscli.setvalues.t2reportfiles.msgpack3DOT0-TC-RDKB-TELEMETRY-1027Value of Telemetry 2.0 messagepack given as rbuscli command
Eg: rbuscli setvalues Device.X_RDKCENTRAL-COM_T2.ReportProfilesMsgPack string  <value>
27property to set the value of T2 msgpack 2rbuscli.setvalues.t2reportfiles.msgpack23DOT0-TC-RDKB-TELEMETRY-1027Value of another Telemetry 2.0 messagepack given as rbuscli command
Eg: rbuscli setvalues Device.X_RDKCENTRAL-COM_T2.ReportProfilesMsgPack string  <value>
28property to set the value of T2 msgpack 3rbuscli.setvalues.t2reportfiles.msgpack33DOT0-TC-RDKB-TELEMETRY-1027Value of another Telemetry 2.0 messagepack given as rbuscli command
Eg: rbuscli setvalues Device.X_RDKCENTRAL-COM_T2.ReportProfilesMsgPack string  <value>
29property to get the payload for Telemetry 2rfc.telemetry2_0_1.enable.payload3DOT0-TC-RDKB-T2-SYS-INIT-1001Value of Telemetry 2 enable payload in json format
30property to get the ip and url for log uploadip.loguploadurl3DOT0-TC-RDKB-T2-SYS-INIT-1001

Value of the ip and url for checking log upload within double quotes

Eg: "x.x.x.x <url>" 

31property to set the value of HTTP Telemetry 2 Profilerbuscli.setvalue.http.t2profile.13DOT0-TC-RDKB-TELEMETRY2_RBUS-1001

Value of Telemetry 2.0 Report profile for http using rbuscli command, value given as json format

Eg: rbuscli setvalues Device.X_RDKCENTRAL-COM_T2.ReportProfiles string <value>

32
property
Property to
set the value of RBUS Telemetry 2 Profile
get the device model namemodel.name 
rbuscli.setvalue.rbus.t2profile.2
3DOT0-TC-RDKB-
TELEMETRY2_RBUS
IDM-1001Value of
Telemetry 2.0 Report profile for rbus using rbuscli command, value given as json format
the model name 
Eg:
rbuscli setvalues Device.X_RDKCENTRAL-COM_T2.ReportProfiles string <value>
model.name.manufacturer=modelname
33Property to get the device model namedevice.model
.name Property to get the device
3DOT0-TC-RDKB-IDM-1001
3435
Value of the model name
device.model3DOT0-TC-RDKB-IDM-1001Property to get
34Property to get the default partner iddefault.partnerIdTC-RDKB-SYNDICATION-WAN-SSH-1001
36
Value of the default partner
id
ID
default.partnerIdTC-RDKB-WIFI-PWR-10063739
35Property to get the specific partner idspecific.partner.idTC-RDKB-WIFI-PWR-1006
38Property to get the default partner iddefault.partnerIdTC-RDKB-NTP-1004
Value of the specific partner ID
36
Property to get the Serverntp.timeserverTC-RDKB-NTP-1004
40
Value of the timeserver
Eg: ntp.timeserver1=abc.xyz.com
37configure Secure SSR Log Upload URLsecure.ssr.urlTC-RDKB-RFC-MTLS-1001
Value of the secure server url
Eg: secure.ssr.url = https://secure.server.url
38
41
configure Non Secure SSR Log Upload URLnon.secure.ssr.urlTC-RDKB-RFC-MTLS-1001
42
Value of the non secure server url
Eg: non.secure.ssr.url = https://non.secure.server.url
39configure Curl command for Secure SSR Log Upload URLcurl.secure.ssr.urlTC-RDKB-RFC-MTLS-1001
Value of the curl command for secure ssr url
Eg: curl.*\"https://secure.server.url\".*connect
40
43
configure Curl command for Non Secure SSR Log Upload URLcurl.non.secure.ssr.urlTC-RDKB-RFC-MTLS-1001
44
Value of the curl command for non secure ssr url
Eg: curl.*\"https://non.secure.server.url\".*connect
41Log Upload URL for MTLSmtls.log.uploadTC-RDKB-RFC-MTLS-1001

45

Property to get the value of Telemetry Config URL Device.DeviceInfo.X_RDKCENTRAL-COM_RFC.Feature.Telemetry.ConfigURL 

telemetry.config.url

3DOT0-TC-RDKB-RBUS-T2-MP-1001

Value of Telemetry configuration url

46
Value of url for MTLS log upload
Eg: mtls.log.upload=https://mtls.url?estbMacAddress=<mac>&featureName=MTLS_LOG_UPLOAD

42

Property to get the value of telemetry2 report profile to be updated in Device.X_RDKCENTRAL-COM_T2.ReportProfiles

telemetry_rdkb_ccspwifi_profile

3DOT0-TC-RDKB-RBUS-T2-MP-1001

Value of T2 Report Profile in json format

47

43

Property to get the value of telemetry2 report profile 3 to be updated in Device.X_RDKCENTRAL-COM_T2.ReportProfiles

telemetry_rdkb_ccspwifi_profile3

3DOT0-TC-RDKB-RBUS-T2-MP-1001

Value of T2 Report Profile 3 in json format

48

44

Property to get the value of telemetry2 report profile 5 to be updated in Device.X_RDKCENTRAL-COM_T2.ReportProfiles

telemetry_rdkb_ccspwifi_profile5

3DOT0-TC-RDKB-RBUS-T2-MP-1001

Value of T2 Report Profile 5 in json format

45property to set the value T2 report profile 5rbuscli.setvalue.t2reportprofile5 3DOT0-TC-RDKB-RBUS-MP-RPLMT-1001Value of T2 Report Profile in json format enclosed by single quotes
Eg: rbuscli.setvalue.t2reportprofile5='{{{<values>}}}'
46Property to set the value T2 ccspwifi  report profile telemetry_rdkb_ccspwifi_profile 3DOT0-TC-RDKB-RBUS-MP-RPLMT-1001value T2 ccspwifi report profile in json format
47property to enable telemetry using RFCrfc.telemetry.enable.payload3DOT0-TC-RDKB-TELEMETRY_WIFI-1002value to Enable telemetry using RFC in json format
48property to check the LATENCY results of network Performance  tests  with  targeted values performance.test.latency.expectedTC-RDKB-CC-TEAMS-TEST-1000Value of latency targeted rate
49property to check the JITTER results of network Performance  tests  with  targeted values performance.test.jitter.expectedTC-RDKB-CC-TEAMS-TEST-1000Value of jitter targeted rate
50property to check the LOSS RATE results of network Performance  tests  with  targeted values performance.test.lossrate.expectedTC-RDKB-CC-TEAMS-TEST-1000Value of lossrate targeted rate