RDK Resources
[*RDK Preferred*]
Code Management Facility
RDK Forums
[RDK Conferences]
RDK Support
Archives
Papers & Presentations Archive
...
This manual describes the rdk-generic-broadband-image build procedure for Yocto 3.1 builds. This will upgrade the default build system used in RDKB, from morty(2.2) to dunfell(3.1). In addition to upgrades to opensource packages, Yocto 3.1 also contain Long term Support release feature. The current version lacks the variety of features available in the dunfelldu';po-0=nfell. The upgraded build tools will be used to generate rdk-generic-broadband-image for Raspberrypi reference platform.
...
No | Feature | Supported |
---|---|---|
1 | LAN Connected Devices-Ethernet | |
2 | WAN Connected Devices-Wi-Fi | |
3 | Parental Control | |
4 | Firewall settings | |
5 | Advanced Config: Port Triggering | |
6 | Advanced Config: Port Forwarding | |
7 | Advanced Config: Remote Management | |
8 | Advanced Config: DMZ | |
9 | Xfinity Wi-Fi 2.4/5 GHz – Public Hotspot | |
10 | Test and Diagnostics | |
11 | Local WebUI Configuration | |
12 | Factory Reset | |
13 | DHCP /Reserved IP | |
14 | EthWan | |
15 | Eth Agent | |
16 | 2.4 GHz Band Support | |
17 | 5 GHz Band Support | |
18 | Bridge Mode Support | |
19 | Persistent Storage Management | |
20 | WebPA for Comcast,community | |
21 | Lost and Found | |
22 | Bluetooth | |
22 | Harvester Support | |
23 | TR-69 | |
24 | SNMP | |
27 | Boot time data measurement | |
28 | Wireless Protection Setup(WPS - 2G support) | |
29 | Captive Portal | |
30 | Wi-Fi MAC Filtering | |
31 | Log Rotation Support | |
32 | Firmware Upgrade Support | |
33 | Multiboot Support | |
34 | Telemetry Support (T2 single profile support) | |
35 | IPV6 | |
36 | Log level control through CcspLogAgent | |
37 | Band Steering using RSSI | |
38 | Backup and Restore | |
39 | SelfHeal | |
40 | Password-Reset | |
41 | WebUI JST |
...