RDK Resources
[*RDK Preferred*]
Code Management Facility
RDK Forums
[RDK Conferences]
RDK Support
Archives
Papers & Presentations Archive
...
TCP - Method used FTP server |
---|
1)In Your client machine(LAN)you have to run FTP server 2)In router configure Trigger port 443:443 and Target port 21:21 3)External network(WAN) try to access ftp server of client machine using router uplink ip address(Goto terminal enter ftp -p 192.168.2.30) ftp port 21 will not start util you trigger any packet flow on port 443 in your client machine 4)In your client machine(LAN)run https service(In browser https://www.google.com) 5)Goto to your external network(WAN),try access ftp server of client machine(ftp -p 192.168.2.30).incoming traffic on ports 21 after seeing an outgoing packet on port 443 |
UDP - The Netcat ( |
1)In router configure Trigger port 443:443 and Target port 2399:2399 |
...
|
TCP - iperf is a tool to measure the network performance. |
1)In router configure Trigger port 443:443 and Target port 5001:5001 |
By default Port triggering will be disabled in the RPI .We can enable using two methods .One is through DM and other way is through UI
...
In Your client machine(LAN)you have to run : nc -u -l 2399
From external WAN machine run nc -u 192.168.2.30 2399, while client machine(LAN)run https service(In browser https://www.google.com)
Step 1: Login to webui, from navigation -> Advanced ->Port Triggering. Click on Add Port Trigger (Configure Trigger port as 443:443 and Target port as 5001:5001)
Step2: In Your client machine (LAN)you have to run: iperf -s -B 10.0.0.106 -i 1 -p 5001 (10.0.0.106 - LAN IP)
Step3: In the WAN machine run iperf -c 192.168.161.216 -p 5001 -i 1 -t 60 -B 192.168.160.173 (192.168.161.216 - router uplink ip address, 192.168.160.173 - WAN PC Ip)
RaspberryPi
...