...
Flashing instructions(NAND flash)
...
Pre-requirements: Install tftp server in you local machine and copy the image to tftp server location
Step 1: Power on the BPi board
Step 2:You will see U-Boot Boot Menu procedure (ie, startup system, upgarde firmware, ...)
Step 3:Select the second option upgrade firmware -> Run image after upgrading? (Y/n): Y
Step 4:Next on Available load methods select 0 which is TFTP client.
Step 5:Setup device network
Input U-Boot's IP address: (same network as tftp server, eg:192.168.2.1)
Input TFTP server's IP address: (tftp server IP address)
Input IP netmask: 255.255.255.0
Input file name: rdk-generic-broadband-image-bananapi4-rdk-broadband-sysupgrade.bin (BPI image in bin format)
Step 6:Then enter, image will be downloaded from tftp server to BPI and will start flashing the image to BPI device if success. |
|---|
Yocto
Version
- meta-filogic
- meta-cmf-filogic
...
| draw.io Diagram |
|---|
| border | true |
|---|
| |
|---|
| diagramName | featuressuported |
|---|
| simpleViewer | false |
|---|
| width | |
|---|
| links | auto |
|---|
| tbstyle | top |
|---|
| lbox | true |
|---|
| diagramWidth | 851 |
|---|
| height | 654 |
|---|
| revision | 15 |
|---|
|
Lists of supported Features
...
...
Validation Status
Sanity Status
...
Supported Features Validation Results
...
Test Results| Tested on | Status |
|---|
| 1 | erouter0 interface got Wan IPv4 and IPv6 | Pass |
| 2 | brlan0 interface got default LAN IP & Ipv6 | Pass |
| 3 | Able to take SSH Connection | Pass |
| 4 | All CCSP process are running | Pass |
| 5 | Able to Ping www.google.com & ping -6 www.google.com in Gateway (i,e erouter0) | Pass |
| 6 | All systemd services are running | Pass |
| 7 | Able to connect LAN client | Pass |
| 8 | LAN client got IP from default pool range | Pass |
| 9 | LAN client should open with CaptivePortal Page | Pass |
| 10 | Able to connect wireless client | Pass |
| 11 | Wireless client got IP from default pool range(i,e 2G) | Pass |
| 12 | Wireless client can access the CaptivePortal Page(i,e 2G) | Pass |
| 13 | Internet should work on Connected clients after changing the default credentials | Pass |
| 14 | Using dmcli to check the CCSP TR-181 DataModels | Pass |
| 15 | WebUI page should be loaded on Connected clients after changing the default credentials | Pass |
| 16 | WebUI page should be loaded through erouter0IP via RM | Pass |
| 17 |
wlan0 and wlan1 wifi0 interfaces should be UP and RUNNING | Pass |
| 18 | All ccsp logs files should be generated in /rdklogs/logs folder | Pass |
| 19 | Factory Reset (Failed for WiFi known issue) |
Pass Feature Status
| S.No | Features tested on | Status |
|---|
| 1 | WebPa get and set should work, query device. | Pass |
| 2 | LogUpload/Logrotation | Pass |
| 3 | RFC | Pass |
| 4 | Webconfig | Pass |
| 5 | Telemetry 2 | Pass |
| 6 | Usppa get and set are working through DM’s | Pass |
| 7 | Cellular Mode | Pass |
| 8 | Local WebUI | Pass |
| 9 | Firewall | Pass |
| 10 | OneWiFi 2G Test cases | Pass |
| 11 | CPU Proc Analyser | Pass |
| 12 | WAN Connectivity (i,e Ipv4) | Pass |
| 13 | WiFi Connectivity | Pass |
| 14 | LAN Connectivity | Pass |
Known issues
- Mediatek driver support only single wiphy design.we are architecting rdk-wifi-hal to support single phy,current it is under developement and will be ready in Beta release
- As of now single radio (2.4Ghz) working with OneWifi
...
