Page History

Table of Contents

Build steps for compilation on Raspberry Pi with Raspbian OS

Prerequisites:

1. 1. 1. Install the Raspian Pi OS from the “Raspberry Pi Imager” software. Select the Raspberry Pi Os (64-bit) image. 

      2. After installation below are additional packages to be installed for build, db and execution.

sudo apt-get update;
sudo apt-get upgrade;
sudo apt-get install vim;
sudo apt-get install libev-dev;
sudo apt-get install libjansson-dev;
sudo apt-get install zlib1g-dev;
sudo apt-get install libnl-3-dev;
sudo apt-get install libnl-genl-3-dev;
sudo apt-get install libnl-route-3-dev;
sudo apt-get install libavro-dev;
sudo apt-get install libcjson1 libcjson-dev;
sudo apt-get install libssl-dev;
sudo apt-get install uuid-dev;
sudo apt-get install libmysqlcppconn-dev; 
sudo apt-get install libreadline-dev;
sudo apt-get install iptables;
sudo apt install mariadb-server;

Build Instructions

    1.  In a working directory git clone the OneWifi in generic folder and unified-wifi-mesh repository

mkdir easymesh_project
cd easymesh_project
git clone https://github.com/rdkcentral/OneWifi.git generic
git clone https://github.com/rdkcentral/unified-wifi-mesh.git

    2.  Run the makefile of OneWifi with setup option to pull in other dependent repository. This is a one time operation.

cd generic
make -f build/linux/makefile setup

    3.  Build the Onewifi with make command

make -f build/linux/makefile all

    4.   Build easymesh components in the unified-easy-mesh folder

• • • • Controller

cd unified-easy-mesh/build/ctrl
make all

• • • • Cli

cd unified-easy-mesh/build/cli
make all

• • • • Agent

cd unified-easy-mesh/build/agent
make all