Versions Compared

Old Version 16

changes.mady.by.user Pratheepa P

Saved on

compared with

New Version 17

changes.mady.by.user Pratheepa P

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Code Block
    root@Docsis-Gateway:~# dmcli eRT getv Device.WiFi.AccessPoint.1.WPS.Enable
CR component name is: eRT.com.cisco.spvtg.ccsp.CR
subsystem_prefix eRT.
getv from/to component(eRT.com.cisco.spvtg.ccsp.wifi): Device.WiFi.AccessPoint.1.WPS.Enable
Execution succeed.
Parameter    1 name: Device.WiFi.AccessPoint.1.WPS.Enable
               type:       bool,    value: true
root@Docsis-Gateway:~# dmcli eRT getv Device.WiFi.AccessPoint.1.WPS.X_CISCO_COM_WpsPushButton
CR component name is: eRT.com.cisco.spvtg.ccsp.CR
subsystem_prefix eRT.
getv from/to component(eRT.com.cisco.spvtg.ccsp.wifi): Device.WiFi.AccessPoint.1.WPS.X_CISCO_COM_WpsPushButton
Execution succeed.
Parameter    1 name: Device.WiFi.AccessPoint.1.WPS.X_CISCO_COM_WpsPushButton
               type:        int,    value: 0
root@Docsis-Gateway:~# dmcli eRT setv Device.WiFi.AccessPoint.1.WPS.X_CISCO_COM_WpsPushButton int 1
CR component name is: eRT.com.cisco.spvtg.ccsp.CR
subsystem_prefix eRT.
setv from/to component(eRT.com.cisco.spvtg.ccsp.wifi): Device.WiFi.AccessPoint.1.WPS.X_CISCO_COM_WpsPushButton
Execution succeed.
root@Docsis-Gateway:~# dmcli eRT setv Device.WiFi.ApplyAccessPointSettings bool true
CR component name is: eRT.com.cisco.spvtg.ccsp.CR
subsystem_prefix eRT.
setv from/to component(eRT.com.cisco.spvtg.ccsp.wifi): Device.WiFi.ApplyAccessPointSettings
Execution succeed.
root@Docsis-Gateway:~# dmcli eRT getv Device.WiFi.AccessPoint.1.WPS.X_CISCO_COM_WpsPushButton
CR component name is: eRT.com.cisco.spvtg.ccsp.CR
subsystem_prefix eRT.
getv from/to component(eRT.com.cisco.spvtg.ccsp.wifi): Device.WiFi.AccessPoint.1.WPS.X_CISCO_COM_WpsPushButton
Execution succeed.
Parameter    1 name: Device.WiFi.AccessPoint.1.WPS.X_CISCO_COM_WpsPushButton
               type:        int,    value: 0


In BPI Target Board:
root@Filogic-GW:/lib/systemd/system# dmcli eRT setv Device.WiFi.AccessPoint.1.WPS.X_CISCO_COM_ActivatePushButton bool true
CR component name is: eRT.com.cisco.spvtg.ccsp.CR
subsystem_prefix eRT.
Execution succeed.

root@Filogic-GW:/lib/systemd/system# dmcli eRT setv Device.WiFi.AccessPoint.2.WPS.X_CISCO_COM_ActivatePushButton bool true
CR component name is: eRT.com.cisco.spvtg.ccsp.CR
subsystem_prefix eRT.
Execution succeed.


WPS Hardware Key Press in BPI

Steps handled when the WPS button is pushed from the target BPI board:
1.  Listen until the user pushes the WPS button. Thus an interrupt occurs with the event - "code 529 (KEY_WPS_BUTTON), value 1". This is identified from the evtest of gpio pins.
2. Once the button is being pressed, the key press is intimated to OneWifi by the running binary, "/usr/bin/onewifi_component_test_app".
3. The binary, "/usr/bin/onewifi_component_test_app", requires 2 inputs: 
One - wps (the event)
Two - 0/1/2 (2G/5G/6G)

By this way, the communication occurs from the hardware key press to the OneWifi and the flow (functionality) executes as normal.

...