...
5. Copy below content to /usr/ccsp/wifi/onewifi_pre_scriptstart.sh.
| Code Block |
|---|
| language | bash |
|---|
| title | Extender1 onewifi_pre_script.sh |
|---|
| collapse | true |
|---|
|
#!/bin/sh
sleep 5
#To update al_mac_addr in EasyMeshCfg.json to avoid onewifi restarting during fresh boot-up
#wan_mac="$(cat /sys/class/ieee80211/phy0/macaddress)"
#old_al_mac_addr=`cat /nvram/EasymeshCfg.json | grep AL_MAC_ADDR | cut -d '"' -f4`
#if [ "$old_al_mac_addr" == "00:00:00:00:00:00" ]; then
# sed -i "s/$old_al_mac_addr/$wan_mac/g" /nvram/EasymeshCfg.json
#fi
iw phy phy0 interface add wifi0 type __ap
iw phy phy0 interface add wifi0.1 type __ap
iw phy phy0 interface add wifi1 type __ap
iw phy phy0 interface add wifi2 type __ap
iw phy phy0 interface add wifi1.1 type __ap
#iw phy phy0 interface add wifi2.1 type __ap
#Obtain the wifi0 mac address
wifi_mac="$(cat /sys/class/ieee80211/phy0/macaddress)"
#Strip the : and increment mac by 1 to get wifi1 macaddress
mac=$(echo $wifi_mac | tr -d ':')
mac_incr=$((0x$mac + 8))
wifi0_mac=$(printf "%012x" $mac_incr | sed 's/../&:/g;s/:$//')
#Increment again by 1 to get wifi2 address
mac_incr=$(($mac_incr + 1))
wifi0_1_mac=$(printf "%012x" $mac_incr | sed 's/../&:/g;s/:$//')
#Increment again by 1 to get wifi2 address
mac_incr=$(($mac_incr + 1))
wifi1_mac=$(printf "%012x" $mac_incr | sed 's/../&:/g;s/:$//')
mac_incr=$(($mac_incr + 1))
wifi1_1_mac=$(printf "%012x" $mac_incr | sed 's/../&:/g;s/:$//')
mac_incr=$(($mac_incr + 1))
wifi2_mac=$(printf "%012x" $mac_incr | sed 's/../&:/g;s/:$//')
#print the mac address
echo $wifi0_mac
echo $wifi1_mac
echo $wifi2_mac
#Update the mac address using ip link command
ifconfig wifi0 down
ifconfig wifi0.1 down
ifconfig wifi1 down
ifconfig wifi1.1 down
ifconfig wifi2 down
ip link set dev wifi0 address $wifi0_mac
ip link set dev wifi0.1 address $wifi0_1_mac
ip link set dev wifi1 address $wifi1_mac
ip link set dev wifi1.1 address $wifi1_1_mac
ip link set dev wifi2 address $wifi2_mac
ifconfig wifi0 up
ifconfig wifi1 up
ifconfig wifi1.1 up
ifconfig wifi2 up
exit 0 |
...
5. Copy below content to /usr/ccsp/wifi/onewifi_pre_scriptstart.sh.
| Code Block |
|---|
| language | bash |
|---|
| title | Extender2 onewifi_pre_script.sh |
|---|
| collapse | true |
|---|
|
#!/bin/sh
sleep 5
#To update al_mac_addr in EasyMeshCfg.json to avoid onewifi restarting during fresh boot-up
#wan_mac="$(cat /sys/class/ieee80211/phy0/macaddress)"
#old_al_mac_addr=`cat /nvram/EasymeshCfg.json | grep AL_MAC_ADDR | cut -d '"' -f4`
#if [ "$old_al_mac_addr" == "00:00:00:00:00:00" ]; then
# sed -i "s/$old_al_mac_addr/$wan_mac/g" /nvram/EasymeshCfg.json
#fi
iw phy phy0 interface add wifi0 type __ap
iw phy phy0 interface add wifi0.1 type __ap
iw phy phy0 interface add wifi1 type __ap
iw phy phy0 interface add wifi2 type __ap
#Obtain the wifi0 mac address
wifi_mac="$(cat /sys/class/ieee80211/phy0/macaddress)"
#Strip the : and increment mac by 1 to get wifi1 macaddress
mac=$(echo $wifi_mac | tr -d ':')
mac_incr=$((0x$mac + 16))
wifi0_mac=$(printf "%012x" $mac_incr | sed 's/../&:/g;s/:$//')
mac_incr=$(($mac_incr + 1))
wifi0_1_mac=$(printf "%012x" $mac_incr | sed 's/../&:/g;s/:$//')
mac_incr=$(($mac_incr + 1))
wifi1_mac=$(printf "%012x" $mac_incr | sed 's/../&:/g;s/:$//')
#Increment again by 1 to get wifi2 address
mac_incr=$(($mac_incr + 1))
wifi2_mac=$(printf "%012x" $mac_incr | sed 's/../&:/g;s/:$//')
#print the mac address
echo $wifi0_mac
echo $wifi0_1_mac
echo $wifi1_mac
echo $wifi2_mac
#Update the mac address using ip link command
ifconfig wifi0 down
ifconfig wifi0.1 down
ifconfig wifi1 down
ifconfig wifi2 down
ip link set dev wifi0 address $wifi0_mac
ip link set dev wifi0.1 address $wifi0_1_mac
ip link set dev wifi1 address $wifi1_mac
ip link set dev wifi2 address $wifi2_mac
ifconfig wifi0 up
ifconfig wifi1 up
ifconfig wifi2 up
exit 0 |
...
5. Copy below content to /usr/ccsp/wifi/onewifi_pre_scriptstart.sh.
| Code Block |
|---|
| language | bash |
|---|
| title | Extender2 onewifi_pre_script.sh |
|---|
| collapse | true |
|---|
|
#!/bin/sh
sleep 5
iw phy phy0 interface add wifi0 type __ap
iw phy phy0 interface add wifi1 type __ap
iw phy phy0 interface add wifi2 type __ap
iw phy phy0 interface add wifi1.1 type __ap
#Obtain the wifi0 mac address
wifi_mac="$(cat /sys/class/ieee80211/phy0/macaddress)"
#Strip the : and increment mac by 1 to get wifi1 macaddress
mac=$(echo $wifi_mac | tr -d ':')
mac_incr=$((0x$mac + 24))
wifi0_mac=$(printf "%012x" $mac_incr | sed 's/../&:/g;s/:$//')
#Increment again by 1 to get wifi2 address
mac_incr=$(($mac_incr + 1))
wifi1_mac=$(printf "%012x" $mac_incr | sed 's/../&:/g;s/:$//')
mac_incr=$(($mac_incr + 1))
wifi1_1_mac=$(printf "%012x" $mac_incr | sed 's/../&:/g;s/:$//')
mac_incr=$(($mac_incr + 1))
wifi2_mac=$(printf "%012x" $mac_incr | sed 's/../&:/g;s/:$//')
#print the mac address
echo $wifi0_mac
echo $wifi1_mac
echo $wifi2_mac
#Update the mac address using ip link command
ifconfig wifi0 down
ifconfig wifi1 down
ifconfig wifi1.1 down
ifconfig wifi2 down
ip link set dev wifi0 address $wifi0_mac
ip link set dev wifi1 address $wifi1_mac
ip link set dev wifi1.1 address $wifi1_1_mac
ip link set dev wifi2 address $wifi2_mac
ifconfig wifi0 up
ifconfig wifi1 up
ifconfig wifi1.1 up
ifconfig wifi2 up
exit 0 |
...
