Versions Compared

Old Version 2

changes.mady.by.user Rajkumar Narayanan

Saved on

compared with

New Version 3

changes.mady.by.user Rajkumar Narayanan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Generated image has to be flashed to an SD card using this command in local PC:

$ sudo dd if=<path to ImageName.rpi-sdimg> of=<path to SD card space> bs=4M

Ex:

$ sudo dd if=rdk-generic-broadband-image-raspberrypi-rdk-broadband.rpi-sdimg of=/dev/sdb bs=4M

The SD card is inserted to the Raspberry Pi board and booted to check for containers created.

The Raspberry Pi board is connected to the PC via a USB to serial converter and the logs can be checked in console or can be connected via HDMI cable to a TV and logs will be shown in the terminal


Test Setup Block Diagram