RDK Resources
[*RDK Preferred*]
Code Management Facility
RDK Forums
[RDK Conferences]
RDK Support
Archives
Papers & Presentations Archive
...
Note : RPI-3 B and B+ have same Build instructions and testing procedure
Following command can be used to flash the RPI image to sd card using linux machine . dd tool should be available in linux
Code Block | ||||
---|---|---|---|---|
| ||||
sudo dd if=<path to ImageName.rpi-sdimg> of=<path to SD card space> bs=4M Example: $ sudo dd if=rdk-generic-broadband-image-raspberrypi-rdk-broadband.rpi-sdimg of=/dev/sdb bs=4M |
https://www.balena.io/etcher/ can be used to flash RPI image in sd card using windows
RDK-B Bootup Sequence
...